blown

I was playing a gig last weekend and the sound tech ran an XLR cable from my bass to the board. When I turned my amp off the overdrive light and the on (not sure of the right word) light were flashing steadily. Has it blown a fuse? I don't think the ground lift button was on

I have a hartke 4x10 xl 400 watt, 8 ohm [wired in parellel] cab. Now. One of these cones has blown. Paper looks good...low volumes sounds great...but anything over half power from my head the one speaker crunches and sounds baddd.... these are 100$ replacement speakers... I found loads used but...

Was hoping someone here could shed some light on this as I have zero idea what could have happened to cause this. Went to turn my amp on the other day, only play maybe once-twice a week these days, but when I turned it on, the volume output I was getting started getting lower as I was playing...

Hi there! I'm new here and new to cabs, as well. I bought a GK 810GLX and thought it would be an easy project. Well here I am. I don't know the technical terms, but four speakers out of the 8 have a wire that seems to have burned off. Here are pictures: So my questions are: 1. What caused...

Hey guys. So, I've been using my Fender Rumble 100 V3 for nearly 2 years without any trouble UNTIL recently. Been gigging a ton and so I've just been leaving it in the car instead of lugging it in and out of the house nearly everyday. (Lazy, I knowo_O) I live in the south so the summers get...

Hey All- This may be a totally noob kinda question, but here's the situation: I acquired a Fender Bassman 1x15 cab and had always assumed that the speaker had fried (due to the fried sound). It is a JBL D-130F 8 ohm that had been re-coned. Well I just bought a used Peavey Black Widow 1505-8...

I'm really not sure if this is the right place to post this so sorry in advance if it's not. Anyway I am quiet new to the whole sub scene being only 18 years of age so I dont exactly know what's going on with my speaker. Every time I flipped the amp on the speaker plays but it farts until the...

I left my bass amp at home when I went off to college and finally got it up to school today when my parents came up. I was so excited, plugged in and turned it on, and played a single note before it cut out and the yellow fault light came on... I check the back of the cab (PF-210HE) and see that...

I am considering doing some speaker upgrades for my Ampeg and I have not been able to find much info on the various options or experiences of others. So I was wondering if any of you had some experience. This amp has been well loved and gigged so I am not surprised that certain notes push the...

It sort of seems like Eden day around here today. So here's another post. I have a lovely old (1998) Eden D410XLT 8 ohm cab and one of the speakers is blown. 12 years ago or so I had blown one, sent it in to Eden and they reconed it for me. I can't even find anyone to that these days...

Bass was gifted to me 9 months ago. And a few weeks ago went through rehearsal just fine but noticed that I couldn't hear it while playing during church service. I got busy and didn't have time to practice and didn't play a couple Sundays. So I didn't realize something was wrong and I completely...

Okay, has anyone ever fixed an amp with a blown channel? Just wondering if there's anything that can be done.

I have an 8x10 ampeg cab and blew one of my 10 inch speakers. What's the best way to go about replacing the speaker? DIY remedy? What is the cost of taking it into a shop here in Los angeles? Curious as to the contrast cost wise of doing it myself and taking it in. Replacement speaker...

Measurements indicate I have an ‘Open’ voice coil. Replacement driver $183.33 shipped Should I look into having the original rebuilt? Other advice? Thank you everyone! JB

Hello, I got used Fender rumble 100 V3 (Newer one) on 22 Jan and just keep it because I had no basses at that time. Yesterday, I got a new bass (active bass) and plug in and play about 5 minutes. After that, all of my room's electricity is shut down and I smell some burning inside the amp. The...

Hey TB I have an Ampeg SVT PR410 hlf cabinet that makes a very obvious crackle/staticky sound only when I turn the tweeter on, and the sound goes completely away if I dial it all the way down. I am not a “technician” by any means so any advice on what to do next would be appreciated. I’ve seen...

Hi Players, I never thought it would happen, but I've got and issue with my MarkBass rig. I've thrown it down stairs, run over it, shot it with a .50 and have never had one problem! Okay, not really, but it's been solid gear thus far. I bought both a 121P combo and a 121H rear-ported extension...

I played a gig with my new setup: Hartke HA2000 115 1 15" combo with an Acoustic B410 (4 x 10") and a MXR DI M80 and I was blown away with the tone and loudness. I was worried that it wouldn't be loud enough to play with my band, but not anymore. It's rated at 200W at 4 ohms, but the speaker...

Original 15" speaker from an Acoustic Control Corp 106 cab. needs repair.

Original speaker from a Acoustic Control 106 cab. Needs new voice coil. Has mild distortion but no tears. I'm in Stamford CT I'm located in Stamford CT

Some of the songs I'm covering (R&B/Neo-Soul) have a breakdown in the middle where the bass basically blows out for 4-8 bars (not sure how else to describe it). I've tried achieving this with a Swollen Pickle, but it's not doing it for me. By the time I get it to produce the "big, blown...

Not sure what the problem is exactly, have a Tobias Dexluxe IV bass plugged into a Boss ME50B pedal board and into a Peavy minx 110 model Bass amp. With no effects on my pedal board, there's this horrible fuzz I cant get rid of. It's not as bad without the pedal board attached but still present...

For trade only. Local pickup - you pick it up and walk away with it, and we trade smiles. Comes with heavy duty wheels, which is good, because it's not exactly lightweight. :)

At a recent outdoor gig with no FOH support I was using a 410 (4 Ohm) with 500W full range and a 210 (8 Ohm) with 250W as a sub. Both cabinets are about 25 years old. During the gig the 210 gave a squawk and quit working. Figured I'd burned a voice coil. Pulled the speakers today and found a...

Howdy, I'm trying to see how many affected owners of EA CxL-Series 10"&12" cabs with blown speakers are out there. As you may know EA states that "the manufacturer no longer offers rebuild kits for these drivers". Before I venture deeper into this issue to see if a resolution can be worked...

Somehow, the speaker end of the cord got partly pulled out (those two-way speakon combos don't have a very strong spring), and now I have a dead Prodigy. Oh crap! I've been playing solid state with built in protection for so long, I forgot that this can happen. I'm very careful when plugging in...

Hey guys need some help. I have a SWR Triad bass cab with a clown fuse. Not use to having cabs with a Horn as I usually stay away from them lol. Anyways the blown fuse has no markings. Just wondering if if anyone knows what type I need. Would be greatly appreciated. Cab is a SWR Triad l, 4 ohms...

I recently picked up a Mesa Boogie Powerhouse 4x10 from a pawn shop for 300 bucks out the door. I also just purchased a used SVT 3 PRO for $250 from the old Facebook Marketplace today since I am upgrading from an Ashdown Electric Blue 180. It just can not cut through when I am placed next to my...

Hey all - One of the speakers in my Fender NEO 4x10 has blown. I need to purchase a replacement speaker. Anyone know where I can buy a "Fender® Special Design Eminence® Neodymium 10”" for this model? I'm not seeing any pages that sell that particular model. Is there another speaker that I can...

I have an older VL-110 cab with a blown 5.25" driver. Having difficulty in finding a replacement for the Pioneer B11EC80-02F (there's a couple of overpriced ones out there). Can anyone recommend a comparable mid driver that is enclosed/cupped? TIA!

I "stole" a used Hartke 4.5XL (4-10" w/ 5" HF driver) for $150. The seller had disconnected the HF driver because it was "buzzing". I have quotes from Hartke for a replacement driver for $120 and from Full Compass for $50. I'm debating about making this beast "whole" again. It sounds terrific...

Wrong sub forum, ended up being his active pu's. My passive bass had no such thing coming through the speakers.

I have Hartke LH1000 with 4 x 10 and 1 x 15 cab. I've been noticing a rasp sound whenever I get up to around 5 on the volume. I added a DBX 1066 compressor recently thinking that might help clean it up. I love the compressor, but the rasp sound is still present and bugging me. I'm not sure if...

Hey guys, I have this cab powered by a Mesa M-Pulse 600 and recently noticed that it had a lot of static, even at low volume. I had previously only played it in a band context, so the rest of the noise likely drowned it out. My thinking is that it is the tweeter, because when I adjust the L-pad...

I bought a used PF410 Ameg 4 x 10 cab. I like the cab and the sound but noticed that it came to me with the 1" horn not functioning. It is an 800 watt - 8 ohm cab. How can you tell if the crossover is fried or if the horn is fried. I have seen both happen over the years. I try to be a DIY...

Hello I play with Aguilar for almost 10 years, DB 750+ 2X112, killer ! I recently bought an Ag DB 410 (4ohms) + DB 751...I should i have tried it loader when i tested it the first time because the 4 speakers were blown, still working but buzzing' and fartind when i played with a drumer (for...

Time to tap the braintrust here. I have a Mesa Walkabout Scout 12". At rehearsal last week, and all of a sudden amp starts to "crackle/scratch" with intermittent bass coming out, then nothing at all. Did all the standard troubleshooting: changed basses, cables, no pedalboard, tried the head...

Been having this issue with both of my GK NEO 410 cabs. One since last February, the other has recently started this behavior. A speaker--usually the top right--will emit a fuzzy, crackling noise whenever they receive any signal after a few minutes of use. I've replaced speakers twice in each...