It has been refinished, and it has been through a lot, I would rate it FAIR using the Reverb system, so the price reflects that.
I don't know what original features were supposed to be there, those early models are all kinda uniques.
I found a similar one presented in this video:
The truss rod...
2001 Pedulla Pentabuzz (Fretless) w/ OHC and Pedulla Gigbag
Previously Owned by the great Roy Vogt.
Bartolini Electronics
Comes with Pedulla Tool
$3500 Shipped.
2001 Pedulla Pentabuzz (Fretless) w/ OHC and Pedulla Gigbag
Previously Owned by the great Roy Vogt.
Bartolini Electronics
Comes with Pedulla Tool
$3500 Shipped.
I just bought new Harley Benton flatwounds and the A string is buzzing when played open, first and second fret. I have tried pushing down between the nut and the tuning peg and that did not help. Also tried putting pressure on the nut itself to see if it was too loose there but no help. The...
I'm borrowing this bass that has been sitting unplayed for some years now. It seems to be in good shape, nothing structurally wrong at first glance.
I'm getting a buzz/rattle on the low E string that is coming from the bridge (see attached audio). None of the other strings have this issue and...
So I got a Hartke HD75 the other day and i'm having an issue with what seems to be louder than normal noise coming out of the cone. EQ is flat, knobs are flat. same noise happens even when bass is not plugged in. is it safe to say that maybe the amp is a dud and I should take it back? im also...
I’ve been struggling with fret-buzz on the lower frets (2-7 in particular), the G string being the main offender (by far) although there’s a tad on the D string too. Relief is set to 0.12” (0.3mm) and bridge action is fairly low, but nothing extreme.
The bass in question is a 2016 American Pro...
In contrast with almost all the people here on TalkBass, I don't have a lot of knowledge about everything related to bass and pickups, so that's why I need you guys.
I have a bad habit of putting my thump on the first magnet (I think-) of my P-bass Pickup (Fender American Standard P-Bass...
Last week I noticed my right studio monitor making a nasty buzzing / distortion sound.
Unplugged the cable, plugged it back in, noise still there. Solo'd the left speaker, the right, switched the inputs, Identified that it really was the right speaker with the problem and not the sound source...
Hello! I am trying to identify what is causing the hum / buzz with this bass so I can get it gig ready. I do not see any disconnected wires on the pots or the output jack.
I know nothing of soldering, but the white wire connection here looks off. Is this my problem? I'm sorry if this is a...
Hi! I was playing with my friends Orange AD200 MKIII bass head the other day when all of a sudden it went mute. Just like that. Power stayed on but no sound was coming out of the cab. I tried to smell out if there would have been an electrical burn, but I couldn't smell anything too strong. When...
This rare 1993 Pedulla Buzz Lined Fretless 4-string bass is Used but in Good Condition; it has been played regularly and the polyester finish on the fingerboard shows wear / chipping (it can be refinished or epoxied to make it look like new if you desire). The body has finish scuffs, scratches...
This rare 1993 Pedulla Buzz Lined Fretless 4-string bass is Used but in Good Condition; it has been played regularly and the polyester finish on the fingerboard shows wear / chipping (it can be refinished or epoxied to make it look like new if you desire). The body has finish scuffs, scratches...
Hello,
I have a pedal train set up with 6 pedals on it. Sometimes my sound cuts out or a buzz happens. If I play live the thing that usually fixes the issue temporarily is lightly smacking my Ibanez DE7 Echo/Delay peday. I tap the side where the pedal cable connects to it. Sometimes it makes...
I did a new setup in the winter, and all was good.
Then one day in spring (you see where this is going) I start learning a new piece, playing elsewhere on the neck (mostly B/E/A around 4-6th frets), and there's this very unpleasant buzz as I release each note, even when already using a fretwrap...
I've taken the bass back up after 45 years. Trying to work myself into shape, but getting noticeable E string fret buzz often. Other 3 seem alright. Is there a definitive way to tell if its the bass or my arthritis?
Thanks for any advice you can provide.
Jon
A quick demo showing how single coil buzzing can be reduced by having a somewhat thick metal plate surrounding or covering (quite close) to the pickup. The pickup in the video goes straight to a jack, then cable to Ampeg combo.
I have had trouble with multiple single-coil basses and...
I have an issue with one of my basses (Fender Japan Heritage 60's P bass). It will make a considerable buzz noise when going through an XLR. It's drastically reduced by turning down the treble on the amp or the tone on the bass. I've tried different cables and the issue appears both when using...
One of my favorite cabinets developed a buzz and I isolated it to one speaker. After removing the speaker I can get the buzz to go away by holding the spider (I believe that is the correct term for the webbing below the cone that forces sound to move outward) down with two thumbs. It seems the...
my girlfriend gave me one of the "store brand" gear4music basses for christmas this year and ive had trouble setting it up. i saw a thread from ages ago telling me to loosen the truss rod as the buzz was only from fret 1-3. did that, 2 strings fixed. the other 2 i tried adjusting the action of...
Hey guys
I have "inherited", so to speak, a couple of Ashdown cabinets.
It should be the entry level series I guess.
1 RM-MAG-115 rated at 250W - 8 ohm
1 RM-MAG-212 rated at 250W - 8 ohm
Attached to a MarkBass Nano 300 I can notice 2 things:
1- the volume is not so much, even with both cabinets...
I just unwound the E string on my bass because I realized the string was twisted and was giving me pitch issues, so I strung it up properly only to find that my A string now buzzes on frets 12-20. I left the other three strings on fully wound when I removed the E string, but only the A string is...
Hello! This is my first post in TalkBass although I've been reading you guys for years.
So, today I bought a Hartke Hydrive 112C for a really good price, and when I was omw to getting it (200KM in car), the seller called me to say that the amp was doing a strange buzz on low frequencies while...
Hello!
If I plug my bass in and turn the amp volume loud then turn down the bass I can hear a bit of a buzz. Soon as I touch the jack the noise stops completely. I guess this means it's some grounding connection issue in the bass.
Is it ok to leave it as is or is this something that needs...
I'm assuming this is due to string height, but ive tried adjusting the action and truss rod and i just cant get it lower without a ton of buzzing (and ive already accepted too much so that i got a dead fret)
My fretting fingers take too long pressing and leaving the strings
However, when i...
so, I recently got my bass set up by my friends guitar teacher. it wasnt anything bad, we replaced the strings and evened out the action which was terrible. it's been about a week with my bass and it has some buzz after the setup. I figured it would just go away i guess but it hasn't. the buzz...
I recently had a 0.5 degree Stew Mac shim installed in my bass because my bridge saddles were so low and my relief minimal, but action at the 12th fret was still around 3-3.5mm.
Since then my action is closer to 2.5mm and much more comfortable to play. However, my bass also seems to have...
Hi everybody, I have a Yamaha bb234 which is passive pj configuration. When I turn up the tone, I get buzz/hum from the pickups. The J and P make different humming sounds but the J is way louder than the P.
After looking online and reading forums here I took it upon myself to shield the bass...
Who is slamming the bull fiddle on the fill the ad void music for BUZZR TV?
Anyone know? I could only find the name of the tune.:cool:
buzzr tv music - Google Search
Hi!
I own a Fender Precision Bass
(60th Anniversary Edition)
New pickups were recently installed, Aguilar AG4P60.
Sounds great but I have 2 problems:
1- Got a static problem..
At first, there was a static noise when I was rubbing the front of the bass (on the pickguard).
So we sanded the...
Hello everyone,
I have an 80's Peavy T-20 bass. Was wondering what opinions would be in regard to upgrading the circuitry and pickup on this thing. It's kinda buzzy when trying to record with it
Hi Talkbass,
I'm having an issue with with my Squier Vintage Modified Mustang.
When I release the the string to end a fretted note, I get some clicks & buzzes from the string rattling against the fret.
I don't have any fret noise at the beginning of the notes, just at the end when I release...
Hi TBers,
I didn't know if this fits better into electronics or repair. If this is out of place, please redirect.
I have built a LP junior DC guitar (sorry:sorry:), with a single P90 pickup and 60s wiring (1vol 1 tone). Pots ar 500k log CTS. It worked great for about a year, and still does...
I have a pretty nice pedal board, and I'd like to work in a new fuzz tone. I have a Big Muff pi op-amp, and it works just fine, but I'd like a different variety of fuzz. But the last three fuzz pedals I bought all had the same problem, and I can't figure out what's wrong. When the pedals have...
Hi there, all. I need a bit of help with my bass. I built this thing custom using Warmoth parts a few years ago. It's got a J neck pickup and an MM bridge pickup, and active electronics. I sounds great, but obviously I don't have a whole lot of support when it comes to fixing it! Hopefully...
I have a two-year-old Traynor SB115 combo amp that began humming (lightly but still annoying) a week ago. It stops when I touch the bass strings or bridge. It is the amp, not the guitar or cable (I have other amps, guitars and cables).
Would anyone know anything about this? Thanks.
Hi,
I have a strange problem with buzz. When I plug my player p bass into Ampeg scr-di preamp it buzzes. If i roll the tone knob completely off, the buzz stops. I took pickguard and bridge off to see, whether soldering was ok, and it was. I also took tone and volume knob caps off. After putting...
I know there are a ton of these on here, but none get at what I'm experiencing specifically...
... a buzz that only happens on the A string, any fret, and only when it's tuned to A. You can hear it through the amp. Does my head right in.
I'd honestly give up on the bass before the strings, so...
Do you have this bass?
Blue-green burst PJ Pedulla Pentabuzz 17.5mm spacing. I'll pay more if you can prove it is this exact bass, but I'm interested in any Pentabuzz in good condition with these specs.
I have a bass with active pickups. When I plug it into a bass amp run through a PA system I have been using with a band in the last couple of weeks it causes a low buzz but only when the other musicians are not playing. It goes away when I turn the volume knob all the way down. When I plug it...