Up for sale is a 920D Concentric (Stacked Knob) Control Plate for early 60s style J Bass. I have one of these on another J Bass build and they work great. I just don't need a second one. I don't have the original mounting screws, but it's just your typical Fender type screws. If you need a few...
Up for sale is a 920D Concentric (Stacked Knob) Control Plate for early 60s style J Bass. I have one of these on another J Bass build and they work great. I just don't need a second one. I don't have the original mounting screws, but it's just your typical Fender type screws. If you need a few...
This is a very well made stacked knob ("concentric") harness and control plate handmade by Dave Starr in the USA. You can have the look and sound of the classic 1960 J Bass sound with the switch in parallel. Switch to series and you get a nice boost for a more aggressive tone. It looks and...
This is a very well made stacked knob ("concentric") harness and control plate handmade by Dave Starr in the USA. You can have the look and sound of the classic 1960 J Bass sound with the switch in parallel. Switch to series and you get a nice boost for a more aggressive tone. It looks and...
This is a well-made stacked knob concentric control plate for a Jazz Bass. I don't know who made it, but it consists of quality CTS pots, Switchcraft output jack, and orange capacitor. Both tone knobs have 10 detent "clicks." There is a bit of messy solder on the pots, but everything works...
This is a well-made stacked knob concentric control plate for a Jazz Bass. I don't know who made it, but it consists of quality CTS pots, Switchcraft output jack, and orange capacitor. Both tone knobs have 10 detent "clicks." There is a bit of messy solder on the pots, but everything works...
Hey guys
I'm assembling a parts PJ bass. I got a regular P body with a regular 3 holes pickguard so I decided for a dual concentric pots configuration, and output jack.
I wanted the classic vol/tone for each pickup, the early jazz bass configuration.
The thing is, I ordered the wrong pots. These...
I just picked up a used Fender Precision Bass that has 3 sets of pickups in it. It has a (big) EB-3 style Humbucker at the neck, standard P-Bass pickup in the center and a standard J-Bass pickup at the bridge. I would like to replace the existing pots & mouse nest of wires in the cavity (and...
Hey, guys. So I currently have this 2 knob bass that's volume/volume. Both of the pots are 250k... I want to replace them with 2 concentric knobs for a stacked volume+tone on both. From what I've heard, this is a common upgrade on Jazz basses (although this is not a Jazz). So now technically I...
920D Custom JB-CON-CH/BK+T Upgraded 62 Jazz Bass Concentric Control Plate w/ Toggle
Does anybody have any experience with these?
My number one bass right now is a Jazz, and I'm thinking about modding it in the near future. Previously my number one was a Precision with a Jazz neck, and I wasn't...
I just got a new preamp for my bass. Since I can't leave well enough alone, I want to add a passive tone control. Ideally, I'd like to have it stacked with the volume. As is is common on active preamps, the volume uses a B50K pot. The perfect part for this project would be a B50K/A500K pot...
OK, maybe I have been looking in the wrong places, but does someone know where I can find set screw type, numbered concentric knobs? Maybe kind of like Gibson's but smaller? I need two sets plus a matching non concentric....
Thanks in advance
Excellent condition knob set. 3 plus one for stack knob. These fit the 6mm and 6mm/4mm stack like found on Glockenklang, MEC and some other preamps. Very high quality knobs.
Yours for $20 shipped CONUS. Happy to ship elsewhere if buyer pays any additional shipping. PayPal is fine.
Excellent condition knob set. 3 plus one for stack knob. These fit the 6mm and 6mm/4mm stack like found on Glockenklang, MEC and some other preamps. Very high quality knobs.
Yours for $20 shipped CONUS. Happy to ship elsewhere if buyer pays any additional shipping. PayPal is fine.
Excellent condition knob set. 3 plus one for stack knob. These fit the 6mm and 6mm/4mm stack like found on Glockenklang, MEC and some other preamps. Very high quality knobs.
One has a large indicator hole for some reason. Not sure why. Bought these direct from Germany.
Yours for $20 shipped...
Excellent condition knob set. 3 plus one for stack knob. These fit the 6mm and 6mm/4mm stack like found on Glockenklang, MEC and some other preamps. Very high quality knobs.
One has a large indicator hole for some reason. Not sure why. Bought these direct from Germany.
Yours for $20 shipped...
Every damned time I use EMG I swear I'll never do it again. The plastic knobs are so tight to each other if you turn one, you turn both. The replacement metal knobs never fit right, they tighten up crooked and - yep - turning one turns both.
I have knobs in 6mm/8mm from EMG, BBG, et al. None...
I need a stacked concentric 500K/500K audio taper pot with a bushing long enough for rear mounting. Ideally solid shaft, 6mm top and 8mm diameter bottom. Using it for a dual tone control
The only thing I can find is this sketchy no-name: 500K-500K Stacked Concentric Pot | Allparts.com (EDIT...
This is a beautiful 2011 Squier by Fender Vintage Modified Jaguar Bass Body. It's the full 34" Scale; not a Shorty. This is the higher-end body, as it has the Seymour Duncan-designed P and J bass pickups (stock passive and sounds great), plus, it also boasts the "Dual-Concentric" stacked...
This is a beautiful 2011 Squier by Fender Vintage Modified Jaguar Bass Body. It's the full 34" Scale; not a Shorty. This is the higher-end body, as it has the Seymour Duncan-designed P and J bass pickups (stock passive and sounds great), plus, it also boasts the "Dual-Concentric" stacked...
Hey Folks,
Something that has bugged me for a while but never looked for an answer.
I find whenever I put the smaller knobs on dual concentric pots, the top knob always looks and turns wobbly looking or "catty wompus". I try and fiddle with trying to make it flat/level, tighten and still...
I had another thread about a bad pot. I just bought another concentric pot and the values are supposed to 500k
I measured the resistance;
One is 443k
And the other is 543k
Is this a problem? Aren't they both supposed to be around the same value?
I'm guessing the difference in value will...
Bought these for a project that never happened so they are unused. $13.50 new each @ BestBassGear :
Concentric Stacked Metal Dome Knob - EMG - Best Bass Gear
$20 for the pair shipped pp lower 48 NO trades
Bought these for a project that never happened so they are unused. $13.50 new each @ BestBassGear :
Concentric Stacked Metal Dome Knob - EMG - Best Bass Gear
$20 for the pair shipped pp lower 48 NO trades
I posted the other day regarding ideas how to wire a set of EMG Gzr Butler pickups in a three hole pick guard, or the standard vol/tone set up.
I decided to go with the concentric pots, vol/tone for each. As I was researching, I found a guy who wires a set for jazz basses that one can use...
Great custom shop p/j bass up for sale. Kind of a combination of different era Fender basses. The style overall is very 50's with the tele style headstock, 2 saddle bridge and transparent blonde finish and glossy maple neck and fretboard. However, the body is contoured very comfortably like a...
Great custom shop p/j bass up for sale. Kind of a combination of different era Fender basses. The style overall is very 50's with the tele style headstock, 2 saddle bridge and transparent blonde finish and glossy maple neck and fretboard. However, the body is contoured very comfortably like a...
I'm trying to figure out the type of cap to use to emulate the earliest jazz basses and understand they originally used a 0.047 for neck and 0.033 for bridge? I know it won't make a world of difference, but was this actually what they were wired up with?
For Sale: New HB7 Tuner Keys. $60.00 shipped SOLD
Retrofit your Mexican made Fender with our new HB7 American Classic tuning machines. 27:1 gear ratio.
Fender Roadworn Jazz Pickups VGC. $40.00 Shipped.
Dual Concentric Jazz Control Plate with Pots and Knobs. $50.00 Shipped.
For Sale - Fender...
For Sale: New HB7 Tuner Keys. $60.00 shipped SOLD
Retrofit your Mexican made Fender with our new HB7 American Classic tuning machines. 27:1 gear ratio.
Fender Roadworn Jazz Pickups VGC. $40.00 Shipped.
Dual Concentric Jazz Control Plate with Pots and Knobs. $50.00 Shipped.
For Sale - Fender...
I'm trying to find a concentric pot for bass and treble controls on Stingray preamp clone. Schematic says 100k audio for bass and 1M rev audio for treble. Danelectro concentric hass 100k linear and 1M audio taper. I can wire 1M backwards to get same taper as 1M rev, right? How will 100k linear...
Hey everyone!
I'm brand new here, and also brand new to bass electronics, but I've been doing some research (A little bit of knowledge is a dangerous thing ;) ) and I have an idea I'd like to run past y'all.
I just bought a Pro-Tone V which as far as feel goes, is my dream bass. The problem...
Absolutely beautiful Mother of Pearl/Abalone stacked pot.
The inner hole is for a tighter shaft typically found on a Warwick or Carvin.
I ordered this from Germany and the shipping alone was $25
Free Shipping.