Okay so, I've pretty much only used flats for the past 3-4 years and recently I bought an Ibanez BTB806S and I'm having a lot of trouble finding a set of flats for it. I've seen a few other threads and the only options I've seen are payson and pyramid strings. But I'm wondering if there are any...
1 brand new, unopened, double sealed set.
Light gauge : .096, .077, .056, .039.
I was going to put these on my '78 Music Man Sting Ray but decided not to.
1 brand new, unopened, double sealed set.
Light gauge : .096, .077, .056, .039.
I was going to put these on my '78 Music Man Sting Ray but decided not to.
Hello bass enthusiasts!
I've always been a 5 string roundwound player but recently I got myself a 6er and I'm getting more and more into it. At the moment I have (Galli) flat wounds on it, mostly to get a different tone from my 5 string. It is great for a warm chord tone but slap and tapping...
LaBella Deep Talking Bass 760FGS (4 string) Golden Alloy Flat Wound bass strings. Standard long scale.
$33 PayPal packs it well and ships it fast USPS Priority (lower 48).
Great sounding strings, but higher tension than what I am used to (TI Flats), so I had to pull them shortly after...
LaBella Deep Talking Bass 760FGS (4 string) Golden Alloy Flat Wound bass strings. Standard long scale.
$33 PayPal packs it well and ships it fast USPS Priority (lower 48).
Great sounding strings, but higher tension than what I am used to (TI Flats), so I had to pull them shortly after...
It says it all in the title this time. I am finding my string preference leans towards flat wounds but sometimes I need the round wound bite, especially for slap on a few songs (and sometimes in the same song as a flat wound tone). I tried a search hear and on google but did not get any hits...
So I have the signature jaco bass, and I want to put on some strings that would sound like him, but he used round wounds which would destroy the fingerboard. So I'm asking what a a flat wound or half wound solution would be that would still give me that sound.
The phosphor bronze strings that came with an acoustic bass guitar that I bought were too bright with not enough bass, although they were nice and loud. I bought some tapewound strings which sounded great but muted even when I just played it with a couple of guitarists in a small living room. I...
Cheers: You are viewing a lightly used 5 String set of La Bella LTF's(Low Tension Flats). These are fantastic Flats with tremendous thump. They are cut for a 3X2 or 4X1 Head-stock. Free Shipping to USA.
Link to product Spec page:LTF-5A Low Tension Flats, 5-String 42-118 | La Bella Strings
Pics...
Cheers: You are viewing a lightly used 5 String set of La Bella LTF's(Low Tension Flats). These are fantastic Flats with tremendous thump. They are cut for a 3X2 or 4X1 Head-stock. Free Shipping to USA.
Link to product Spec page:LTF-5A Low Tension Flats, 5-String 42-118 | La Bella Strings
Pics...
Hi everyone!
I recently changed my tuning from EADG to DGCF on my Yamaha BB1200s (34¨scale). The problem is that I´m using light gauge strings (40-100 DR Hi Beams (round wounds)), and now my bass lacks ¨punch¨.
I would like to have the loose feel of the down-tuned light gauge strings to some...
I have a 5 string set of the coveted Thomastik Flats. Long Scale .043, .056, .070, .100, .136 ONLY THE B STRING has ever been used and it is un-cut with only an hour or so of playtime and little to no visible bend at the bridge. I installed it alongside a used set to test the waters...The E, A...
I have a 5 string set of the coveted Thomastik Flats. Long Scale .043, .056, .070, .100, .136 ONLY THE B STRING has ever been used and it is un-cut with only an hour or so of playtime and little to no visible bend at the bridge. I installed it alongside a used set to test the waters...The E, A...
Spotted these in the drawer and haven’t had a Pbass in a while to place them on so off they go!
These are Brand New!
2806 & 2804
$55 for both sets shipped.
Thanks.
Spotted these in the drawer and haven’t had a Pbass in a while to place them on so off they go!
These are Brand New!
2806 & 2804
$55 for both sets shipped.
Thanks.
TI Jazz Flats
$40 shipped or trade for nickel rounds +/- $ as needed.
About 5 hours of playtime on them.
34" scale
Cut for a 2x2 headstock with many wraps around the tuning pegs. See photos below.
Stretched out, the actual useful length of the G string is 42" NOT including at least one wrap...
TI Jazz Flats
$40 shipped or trade for nickel rounds +/- $ as needed.
About 5 hours of playtime on them.
34" scale
Cut for a 2x2 headstock with many wraps around the tuning pegs. See photos below.
Stretched out, the actual useful length of the G string is 42" NOT including at least one wrap...
Hey guys,
This is a relatively new (that’s what I was told) set of Labella medium flats (0.49 G string) that came with bass I just bought...
They sound pretty good except for the E string which sounds “dead” or “muddy” as compared to the other three... if you look at the E string in the picture...
Hi everyone, I'm a bit confused as to what strings would be appropriate for a Hofner Ignition Violin Bass, length/scale wise.
I know that it's a short scale bass, and I ordered a set of La Bella Deep Talkin' "Beatle Bass" flats, but as soon as I had them on my bass the E string snapped at the...
I'm almost embarrassed to ask this, but here goes...
So I play 2-string bass with a slide on more than a songs. (Super-simple rudimentary basslines in a sloppy noisy rock band.) I recently upgraded my bass and want to switch out the cheap roundwound strings that came on it to something else...
YES, I have read the other threads. This one is different by the combination of things I need:
Flats;
Low Tension;
Through body installation
Bright tone (as close roundwounds as possible)
Slinky Cobalt Flats would be a contender, but they don't seem to be available any longer and I don't know...
Hello all. I have a five string Steinberger Synapse fretless. It's my #1...it will go in the ground with me when I leave this Earth.
I have an issue every time I need to replace the strings, which is that I've only been able to find one available set of double ball flat wound strings for five...
For Sale, Absolutely like new 2018 Fender P-Bass MIA Sunburst with maple neck.
Purchased new, installed flatwounds on it (La Bella on this guy, if I remember correctly), and swapped the pick guard for a tortoise shell. I still have the original pick guard (light mint) with the original plastic...
For Sale, Absolutely like new 2018 Fender P-Bass MIA Sunburst with maple neck.
Purchased new, installed flatwounds on it (La Bella on this guy, if I remember correctly), and swapped the pick guard for a tortoise shell. I still have the original pick guard (light mint) with the original plastic...
Hi Guys! I'm interested in finding a set of flat wound strings for an acoustic Bass that will sound really good when practicing "acoustically", that is, when not plugged in. I used D'Addario Chromes on my P Bass, but I don't think they would sound very good on an acoustic that's not plugged in...
I am contemplating switching over to LaBella flat wounds, and I am thinking that either the Low Tension Flexible Flats or the Deep Talkin' Gold strings are the way I want to go, and was wondering if anyone had any input on which is better, and why. I have gold hardware on my bass, and think it...
hello, I recently purchased a 2014 Gibson SG bass and I am going to swap out the strings when it gets here (not for a week yet:sour:) so I’m wondering what others are using and like using. Currently I’ve got D’Addarios on both my basses, chromes on the tele bass and nylon tapes on my Bronco. I...
Hey ya’ll...
Been playing bass for about ten years now, but only recently started doing so semi-professionally (usually work as a guitarist). I ended up getting a squier jazz bass from a friend. It has flatwound strings on it, a string type that I generally prefer as i’m a fan of deeper, warmer...
Excellent shape, probably only 5 hours of play time over the three months I have owned them. I needed to purchase the JF365 set for a 35" scale bass but bought these by mistake. Have them on a 4+1 headstock and kept as much length on the G string as possible in case I would use the four strings...
Excellent shape, probably only 5 hours of play time over the three months I have owned them. I needed to purchase the JF365 set for a 35" scale bass but bought these by mistake. Have them on a 4+1 headstock and kept as much length on the G string as possible in case I would use the four strings...
Got this set of string on a bass I bought, great shape - but not sure what they are. From the "SILK COLOR" posts they could be GHS and or LaBella according to the blue silk.
They are cut for a Fender Precision bass and sound great.
$12.00 CONUS SHIPPED ONLY.
Got this set of string on a bass I bought, great shape - but not sure what they are. From the "SILK COLOR" posts they could be GHS and or LaBella according to the blue silk.
They are cut for a Fender Precision bass and sound great.
$12.00 CONUS SHIPPED ONLY.
For sale is a very nice and very well made 1981 Vantage VP-710B bass featuring dual precision pickups. These were built at the legendary Matsumoku factory and represent the high end of the Vantage line of guitars and basses that were made there in the heyday of the early 80s.
Many have referred...