frequency

  1. Katoosie

    Frequency range on cabs

    Hi again, Another short and sweet thread from me - this time I'm curious about cabinet frequency range. A lot of cabinets list in their specifications that they support a range of frequencies from, for example... 60Hz to 19khz or some such. I play a 5 string. B is around 30hz. If for some...
  2. O

    Low frequency boost when playing on E/A strings

    Hey bass nerds, Been having a problem lately with some basses of mine. I am noticing this low frequencey bump every time i play notes on the E and A strings. The frequency number is around the 60 or 70hz mark, I got this estimation by recording myself into my DAW and using Pro Q 3 to see. Now...
    • ob641
    • Thread
    • bass eq eq help frequency low technical question
    • Replies: 2
    • Forum: Basses [BG]
  3. djmay

    Why do amplifier onboard tone controls change output levels?

    My signal chain is 5-string fretless with LPF on each pickup > Alembic SF-2 > TC Electronic BQ500 with Bass, Lo-mid, Hi-mid and Treble controls. I set and forget the LPFs and HPF. If I change any of the LPF/HPF filters it does not affect the output level. If I change for example the amplifier...
  4. M

    The science of setting intonation and saddle location

    (I think) I understand how adjusting the location of the saddle of each string affects intonation of a string so that the open string and the same string fretted halfway up the fingerboard can be in tune. What I don't really get and haven't seen a good explanation of is...why shouldn't the...
  5. XLunacy

    WMD Parametric EQ : knobs and frequency response

    I know this pedal is not exactly new, but a recent thread asking about parametric EQs popped up recently (Parametric EQ Pedal?) so I thought it could be interesting to someone. So the WMD Parametric EQ is a 3 band EQ, it looks like this : It's about the size of an MXR pedal, quite compact...
    • XLunacy
    • Thread
    • frequency parametric eq response wmd
    • Replies: 4
    • Forum: Effects [BG]
  6. bon viesta

    relationship between sealed cabinet volume and speaker performance?

    how does the internal volume amount inside a sealed cabinet interact with the speakers frequency response? i read that small sealed enclosures can limit the speakers low end but it makes the mid range and bass tighter, and that a bigger sealed cabinet will make the low end bigger and boomier but...
  7. rickwolff

    Double Bass A New Clue to finding the Magic Sound

    I've been wondering why I can't get a recorded sound that is (close to) as good as the commercial recordings. It couldn't be MOI, could it???? Nah. My bass? I'd better hope not - my wife will kill me if I start looking at basses for 10K+. Strings? Maybe. but wait a minute. By accident, I...
  8. LoTone

    Best frequency band to generate "Fretless Mwah"

    I am wondering if the quality of the fretless mwah is, in part, created by putting emphasis on a given band of frequencies? Obviously, the hands of the player, the strings being used, the quality of the fretboard all have a major role. However, I am wondering if there is a way to emphasis the...
  9. DHG69

    Ampeg SVT-410HLF bottoms out

    Hey there, I have a svt-3 with a SVT-410HLF cab and a couple frequency's bottom out. All speakers appear to do it simultaneously. In dont believe the speakers should be all shot or semi blown. You know when you go down bass notes and windows shake on That “special frequency”? Well the...
  10. Ferniff

    Anyone know the frequency range of the Arion SPE-1 Parametric EQ?

    Can't find any manuals online or any helpful information. Looking for a ONE band parametric that can be able to boost from the sub-bass and up to midrange. Also thinking of the Artec parametric but can't find anyone that's not selling it from Japan.
    • Ferniff
    • Thread
    • eq frequency know parametric range
    • Replies: 4
    • Forum: Effects [BG]
  11. Mountainking Frequency LSD *Price Drop*
    Sold

    For sale Mountainking Frequency LSD *Price Drop*

    The Frequency LSD can be as musical or as wild as you want it to be. The solo fuzz tone is super versatile. The Color, Feedback, Sag, and Frequency controls give you an almost limitless amount of control over what type of fuzz you want. The real fun starts when you engage the Freq Out switch...
    $145.00
  12. jdfarrell81

    SOLD Mountainking Frequency LSD *Price Drop*

    The Frequency LSD can be as musical or as wild as you want it to be. The solo fuzz tone is super versatile. The Color, Feedback, Sag, and Frequency controls give you an almost limitless amount of control over what type of fuzz you want. The real fun starts when you engage the Freq Out switch...
  13. H

    real low end frequency of P-BASS

    Hi there I'm playing a MIA standard P-BASS, Daddario Chrome flatwound -- The tone is classic P and I am really satisfied with its low-mid growl and punchy. What I mentioned the low-mid is around 100hz-150hz. (really nice for grunge style) However there is not much real low end freq below 80hz...
    • hhow09
    • Thread
    • frequency low low end precision bass real
    • Replies: 31
    • Forum: Basses [BG]
  14. Ric5

    Frequency Equalization

    This is a good discussion on frequency equalization
  15. Agapeguy

    Frequency and types of bass maintenance

    Salutations, all! I am wondering what others do as far as frequency and types of maintenance? I'm a relatively new bass player (started playing on a Worship Team about 8 months ago) and I'm a heavy sweating player. Right now, for preventive maintenance I just wipe down my basses with some...
  16. zcliu

    Weird noise which frequency is greater than 3 kHz

    I bought an audient ID14 interface last day, and when I plugged my EBMM Bongo into DI jack of ID14, I could hear some noise which frequency is greater than 3 kHz on the interface of EQ plugin. This also happened when I was practising with my ZOOM B3n, but I didn't care about it at that time...
  17. MANTIC Density Hulk in NYC - Sub-harmonizer/Low Frequency booster
    Sold

    For sale MANTIC Density Hulk in NYC - Sub-harmonizer/Low Frequency booster

    ON HOLD, TRADE PENDING. SUp y'all, You most likely have heard of this pedal but many have never used it, getting a sound clip of this pedal is almost impossible because its all about the SUB frequencies. This pedal is not for the bedroom player of the garage band, you really need the subwoofer...
    $150.00
  18. RedMoses

    SOLD MANTIC Density Hulk in NYC - Sub-harmonizer/Low Frequency booster

    ON HOLD, TRADE PENDING. SUp y'all, You most likely have heard of this pedal but many have never used it, getting a sound clip of this pedal is almost impossible because its all about the SUB frequencies. This pedal is not for the bedroom player of the garage band, you really need the subwoofer...
  19. Midak

    Bass 3- & 4-Band EQ Frequency Points

    Hello to all. :) I am designing a custom bass head (tube preamp, solid-state power amp) and I have to decide on the EQ section of it; my options are either a 3- or 4-band EQ, where I am interested to set the frequency points of the circuit, bass/middle/treble or bass/low-mid/high-mid/treble...
  20. NoiseNinja

    What freqùecies does the High and Low knob of Tech 21 GT2 control?

    I am going to order a Behringer GDI21 guitar preamp, a pretty exact but cheaper build clone of the Tech 21 GT2, tomorrow. The plan is to use it as my main overdrive/distortion unit for my bass, as I heard some demos where it is used as such and know Justin Chancellor from Tool in fact also use...
  21. Whil57

    Capacitor frequency - is there a chart?

    I was reading some websites on capacitors, and didnt really understand the volt/ohm input calculations that they used to get frequencies. Basically, what i was wondering, is that if you increased a caps value, at what value (on say a jazz or p pup) would you need to ground everything over the...
  22. d rick man

    What happen to my high frequency?

    I play a Rickenbacker through a fender rumble 75 tilted up right behind me. For two reasons. I like the sound I get with this combination. I use the monitor in front of me everyone else, no lows. My rumble then goes through the PA system. My volume is good and loud and thumping but when go to...
  23. Shishka Bob

    Frequency Range Of Electric Bass Guitar

    I am certain this has been addressed here but I have not been able to sniff my answer out. Please help me to educate our well-intentioned but human sound guy at church about the range of frequency he needs to work with with my bass. I can't seem to get him to understand that, just because it is...
  24. quilanthegreat

    Aguilar TH500 Mid Frequency Knob

    I am hoping other TH users can shed light on the Mid Frequency ("MF") knob. I feel like adjusting the MF knob only introduces very subtle variations in tone. Honestly, even from completely off to completely dimed, I feel like it is hard to audibly hear much of a difference. I tested this by...
  25. Renkus- Heinz Horns & 18Sound drivers Crossovers

    For sale Renkus- Heinz Horns & 18Sound drivers Crossovers

    18Sound HD125 Hi freq drivers. (see spec sheet) Renkus-Heinz SSH-1200 aluminum horns (see spec sheet) (Crossovers no longer available) $100 shipped CONUSA
    $100.00
  26. Doug Parent

    For Sale Renkus- Heinz Horns & 18Sound drivers Crossovers

    18Sound HD125 Hi freq drivers. (see spec sheet) Renkus-Heinz SSH-1200 aluminum horns (see spec sheet) (Crossovers no longer available) $100 shipped CONUSA
  27. Killens84

    Low-gain overdrive pedal with sidechain HPF? (Affect the signal only above "x" frequency)

    I have a Fairfield Barbershop that I really like, but I wish there was a way to have it only affect the signal above a certain frequency, and leave everything below that frequency clean. I know some people run separate dry and wet signals, but I'd like to keep it simple with just one signal...
    • Killens84
    • Thread
    • bass pedal chain frequency hpf overdrive overdrive pedal side
    • Replies: 33
    • Forum: Effects [BG]
  28. Kevomuso

    Bi-amp cross-over frequency point Mesa 4x10 with 1x15

    I have a Mesa Traditional Powerhouse 4x10 bass cab with a Traditional Powehouse 1x15 bass cab. I have acquired an Ampeg SVT-4 Pro stereo/mono amp which has the facility to bi-amp the 4x10 and the 1x15 and manually set the cross-over frequency point so that frequencies below a given point are...
  29. ObeyDaRiffness

    4-band eq vs 3-band w/ mid frequency sweep?

    Which one do you think is more practical/useful, especially for switching between sounds live?
  30. craigie

    resonant frequency in a boomy hall

    We played a friend's wedding at a community center last night and it was a typical hall: long with hard floor and ceiling and very boomy. I run a TC electronic RH450 with an Eden 212XLT. I run a post EQ line into the board. This allows me to make adjustments to suit the room. We mix our own...
  31. EHX Frequency Analyzer
    Sold

    For sale EHX Frequency Analyzer

    Fun ring mod with craziness on tap. It's got the coolest subs and is great for all sorts of wackiness. Tim Lefebvre's ring mod of choice. Comes in original box and with its own power supply (somewhat unique voltage and amperage rating iirc) $85 shipped CONUS.
    $85.00
  32. Coughdrops

    SOLD EHX Frequency Analyzer

    Fun ring mod with craziness on tap. It's got the coolest subs and is great for all sorts of wackiness. Tim Lefebvre's ring mod of choice. Comes in original box and with its own power supply (somewhat unique voltage and amperage rating iirc) $85 shipped CONUS.
  33. Ian Canefire

    Replacing cabinet speakers with lower frequency ones?

    Hi, Can someone with cabinet design software please help me. Plus answer this question... I want to replace my speakers with a pair that go lower spec wise. If the speakers now in the cabinet are 50hz - 4khz and I want to put the same size speakers in but that are 35hz to 3.5khz. Are...
  34. Cavant

    High frequency noise on active bass, help!

    I have a Thunderbird Pro IV active bass, love the sound and everything but unless you roll completely back the high frequency knob there is a very audible buzz, when i up the volume on my amp the same noise becomes audible again, which means it's always there but at low volumes the eq makes it...
  35. Striver

    Monitor frequency response and personal audiometry

    Since audiograms for people vary based on their personal hearing characteristics (health, age, previous noise exposure, etc.), can someone please describe how to evaluate claims of flat frequency response in sound reproduction or recording equipment? For example, studio monitors are described as...
Top Bottom
Back