port

  1. Matthias

    Plugging port at low volume? (Eich BC112/TecAmp Puma)

    Hi! I recently got me an Eich BC112Pro (very small 1x12“ 500W Combo, successor of the TecAmp Puma) and I really like the sound at higher volume, it’s surprisingly loud and handles the low B really well, BUT: At low volumes it has a nasty low mid bump and sounds very boomy. I’m quite sure this...
  2. giedosst

    Ibanez Portamento SRF706 and D'Addario Tapewounds

    Hi Everybody! This one goes out to to the Portamento SRF706 players out there, I'm seriously considering getting one for my main axe (I'm a fretless guy) and was wondering if anybody has used the medium D'Addario ETB92-5 5-String Tapewound Bass strings with the single .035 D'Addario TWB035...
    • giedosst
    • Thread
    • d'addario ibanez port portamento tapewounds
    • Replies: 3
    • Forum: Strings [BG]
  3. wyleeboxer

    Anyone know Aguilar GS112 port lengths? need some advice!

    Picked up a GS112 which had a Deltalite II 2512 speaker installed, seller said he modified the ports length (shorten I believe?) trying to get the most out of the cab. Anyone know the exact port lengths in these cabs or what would be the best length for optimal tone? Thanks Ya'll
  4. sikamikanico
    Sold

    For sale Line 6 Sonic Port audio interface for iOS devices

    Figured I'd post this here too, since this effectively replaced all my pedals for signal processing. Line6 Sonic Port, in great condition, only used for practice in a smoke-free home. Comes with the original box and manual, and with two cables - one with a Lightning connector for newer iOS...
    $35.00
  5. sikamikanico

    SOLD Line 6 Sonic Port audio interface for iOS devices

    Figured I'd post this here too, since this effectively replaced all my pedals for signal processing. Line6 Sonic Port, in great condition, only used for practice in a smoke-free home. Comes with the original box and manual, and with two cables - one with a Lightning connector for newer iOS...
  6. Line 6 Sonic Port audio interface for iOS devices
    Sold

    For sale Line 6 Sonic Port audio interface for iOS devices

    Line6 Sonic Port, in great condition, only used for practice in a smoke-free home. Comes with the original box and manual, and with two cables - one with a Lightning connector for newer iOS devices, and one with the old-style 30-pin connector for older devices (this one is unused). This is a...
    $35.00
  7. sikamikanico

    SOLD Line 6 Sonic Port audio interface for iOS devices

    Line6 Sonic Port, in great condition, only used for practice in a smoke-free home. Comes with the original box and manual, and with two cables - one with a Lightning connector for newer iOS devices, and one with the old-style 30-pin connector for older devices (this one is unused). This is a...
  8. Line 6 Sonic Port audio interface for iOS devices
    Sold

    For sale Line 6 Sonic Port audio interface for iOS devices

    Line6 Sonic Port, in great condition, only used for practice in a smoke-free home. Comes with the original box and manual, and with two cables - one with a Lightning connector for newer iOS devices, and one with the old-style 30-pin connector for older devices (this one is unused). This is a...
    $35.00
  9. sikamikanico

    SOLD Line 6 Sonic Port audio interface for iOS devices

    Line6 Sonic Port, in great condition, only used for practice in a smoke-free home. Comes with the original box and manual, and with two cables - one with a Lightning connector for newer iOS devices, and one with the old-style 30-pin connector for older devices (this one is unused). This is a...
  10. B

    Cab designing, Xmax + port velocity wrt harmonics

    Today, I was playing around with winisd for a new cab for me. I was doing my typical attempt at best compromise of SPL/size/weight for a given driver. As usual, I spent way too long juggling bass extension vs box size vs practical port dimensions (size & velocity). I got to wondering about the...
  11. T

    HELP 210+115 bass enclosure problem. Maybe over-excursion?

    Hi! My name is Tijl. I'll probably need some engineers to help me out. I make cabs occasionally. Mostly guitar cabs which I found quit simple. As for bas cabs I made 2 great sounding cabs before. But now, my 3th bass cab is giving me some troubles. The problem: It is most common with the 2x10"...
    • TijlT
    • Thread
    • air ampeg enclosure experienced help me help! port travel
    • Replies: 120
    • Forum: Amps and Cabs [BG]
  12. kesslari

    Port and Chocolate

    I just discovered this combination and it's pretty awesome.
  13. corvettedcg

    SVT-15E / SVT-15EN - Detached Port Tubes

    About a year ago I purchased a used Ampeg SVT-15EN cab. I disassembled it to make sure it was all in order. After removing the 15" woofer, I noticed two cardboard tubes (3" x 5.5") rolling around loose inside the cabinet. It was obvious they should be attached to the back of the two...
  14. Bubble

    Shared Port in Dual Driver Cabinet Question

    Any reasons why I should or shouldn't buy a shared port cabinet in which each driver is vented into a common channel ? I think they must be fairly good, it appears many low end 4x10's use two individual shared port elements paired and isolated by a center divider, or they sometimes appear as...
  15. xhawk5

    Markbass front or rear port?

    Hi all. I have a fantastic Markbass Little Mark Tube 800 and I'm pushing a 2x15 and a 1x15 8ohm cabs at rehearsal. Getting ready to hit the gig circuit and I'm not lugging those 15's around, plus they get some distortion, which is really not that bad and they sound great. I used to lug my...
  16. Sean775

    Is it true that you can use an xlr microphone in a speaker if you plug it into the line out port?

    I always thought line out was just for attaching the speaker to a larger system, but according to a customer service worker from Guitar Center, you can plug a mic into the line out port and your voice would be projects through the speaker. I just wanted to make sure this was true; I'm terrible...
    • Sean775
    • Thread
    • line line out microphone plug port speaker true xlr
    • Replies: 29
    • Forum: Live Sound [BG]
  17. C

    DIY cabinet: port diameter and length?

    Its been years since I built a hifi subwoofer cabinet and I'm rusty on doing these calculations. Was hoping someone who is more adept can help out. I am converting an old sealed guitar 1x12 into a bass cabinet. Measurements are 23x17x11 which i calculate out to 2.44 cubic feet. The speaker...
  18. mapleglo

    Port conversion, round to rectangular help

    I have these Peavey PA speakers, 112DL. They feature Scorpion cast frame woofers, and some sort of dual driver horns. I use them mostly for monitoring my Fender Rhodes and vocals in my little music room. They rattle pretty badly on the low notes from the Rhodes, and sound a little "boxy"...
  19. Bubble

    Ever Have a Mouse Fly Out of Your Bass Port ?

    I noticed some stuff in my sub woofer bass port and started wondering if anyone has seen a mouse come flying out because of 400 watts or so suddenly scaring the thing out like a bullet. That must be the real reason they make those port plugs, to keep rodents out. Remove to play.
  20. rustyginn

    Help with Ampeg cabinet port tuning...

    Hopefully someone that knows their stuff can answer this... I have an Ampeg 18E cab, the late model 4 ohm/500w version. I replaced the original eminance woofer with... "Dayton Audio PA465S-8 18" Pro Subwoofer 4" VC 8 Ohm" from www.parts-express.com! I was hoping to have better low frequency...
  21. globert

    Markbass hp-102 owners - how long's yr port ?

    Hi I'm making a replica hp-102 cab (BIG edit: i mean 102hf cab!) because I bought 2 markbass 10" drivers cheap. If you felt game, I'd be grateful to know how long the hp-102 port is - how deep it goes into the cab. I dont have the driver specs and i'd like to check my port estimate is in the...
  22. globert

    divided slot port = 1 or 2 ports?

    Hoping someone may know after my www search drew a blank: When designing a bass cab with a slotted port, if the port is divided (e.g a 1/2" strip of wood in the middle along the length of the slot), should the port be treated as 1 port or two separates ports, or somewhere in between? Why do...
  23. FS: two port flanges for Ampeg B-100R or BA-115 amps
    Closed

    For sale FS: two port flanges for Ampeg B-100R or BA-115 amps

    Actually, I put $10.00 in the price field because I had to put something. In reality, these were so inexpensive, I'll give them to someone who can use them, just cover the shipping cost please. These are the plastic ports that are in the back of an Ampeg B-100R and both "port flanges" in the...
    $10.00
  24. cazclocker

    No longer available FS: two port flanges for Ampeg B-100R or BA-115 amps

    Actually, I put $10.00 in the price field because I had to put something. In reality, these were so inexpensive, I'll give them to someone who can use them, just cover the shipping cost please. These are the plastic ports that are in the back of an Ampeg B-100R and both "port flanges" in the...
  25. Port City Orleans Bass Preamp
    Sold

    For sale Port City Orleans Bass Preamp

    This listing is for a Port City Orleans Preamp in excellent condition. These were only made for a short time. They were all hand-made in North Carolina using top notch components (pictured below). This is a great pre. Very warm and responsive. I have since gone the Axe Fx route and do not need...
    $750.00
  26. ajp1991105

    SOLD Port City Orleans Bass Preamp

    This listing is for a Port City Orleans Preamp in excellent condition. These were only made for a short time. They were all hand-made in North Carolina using top notch components (pictured below). This is a great pre. Very warm and responsive. I have since gone the Axe Fx route and do not need...
  27. takeout

    Faital 15PR400 and Mesa Diesel cab - any benefit to port plugging?

    Swapped in some Faitals recently into my two Diesel 1x15s - took very little time to break in and they've performed really well ever since. I made no mods to the boxes in question when I did so; should I have? Thoughts: - I know with "real" TL-606 boxes, the option of port plugging is part of...
  28. S

    Calculating cab port length

    Port Length Calculator
  29. Zeverynth

    Drumskin printing problems

    Hey all, Any moonlighting drummers around? Does anyone know how to remove a mic hole protector without damaging the skin? I got a kick drum skin for my band and want to get it printed. The drum store guy cut and fit the protector saying that it's better to have it fitted first as the width of...
  30. Port City Orleans Tube Preamp
    Sold

    For sale Port City Orleans Tube Preamp

    This listing is for my Port City Orleans bass pre. This is a hand built, all tube unit. Really nice, creamy tone and dead simple to use. It is in excellent condition. There are a couple of thorough reviews of these online. They were built for a very limited time, and retailed for about...
    $700.00
  31. FilCo

    SOLD Port City Orleans Tube Preamp

    This listing is for my Port City Orleans bass pre. This is a hand built, all tube unit. Really nice, creamy tone and dead simple to use. It is in excellent condition. There are a couple of thorough reviews of these online. They were built for a very limited time, and retailed for about...
  32. atracksler

    For sale Sonic port vx

    Like new, purchased for a project that is not going to happen. Comes with box, cables and stand, and anything else that came with it. Works great as an intrface with a computer or mobile device. Open to interesting trades as well.
    $100.00
  33. atracksler

    For Sale/Trade Sonic port vx

    Like new, purchased for a project that is not going to happen. Comes with box, cables and stand, and anything else that came with it. Works great as an intrface with a computer or mobile device. Open to interesting trades as well.
  34. Resonance129

    Porting

    So I've been doing research on Cabs/Amps recently. I currently own an Ampeg 2x10 that's GREAT for rehearsals, but I'll obviously need more than that for gigging. Practically, I don't think I want to go over a 4x10. I've listened to quite a few different brands and have begun to focus on the...
  35. Hammerfield

    Ampeg SVT-15e Bass reflex

    Well, i'm doing a DIY cab of the Ampeg svt15e, but i dont have the measure of the ports or vents. I dont know anyone who has it. They do not have it in my local music store. Thanks!
  36. KJMO

    Playing with port tuning...

    Again, I have been playing around with the same old 10" genz-benz faitals in what was a sealed box. I cut a 4" hole in the cab in the front, left, bottom corner and used my phone to generate a sine wave. I put rice (actually quinoa) on the speaker and have it more or less level. Without...
  37. matt holt

    Help me Port this cab! (Kappalite content)

    Ok Cabinet Gurus: I have a box (currently sealed) with a vb 2.28 ft3 made out of 3/4" plywood. I've installed an eminence defeat-able 250hz LPF. I would like the cab to serve two functions: a full-range 115 BG cab with the LPF turned off, and a small PA sub with the LPF on. Most likely going to...
  38. Doug Parent

    Help needed determining port dimensions

    I scored on Craigslist with some gear hoping I can get some assistance from those with software that can tell me the correct port length needed for this driver. Deets: Gauss 4583a 15" woofer fs 31hz Qms 2.5 Qes .33 Qts .30 Vas 10.00 Enclosure 4 cf internal volume two 4" round ports. Current...
  39. Ampeg B-100R bass port

    Ampeg B-100R bass port

    Missing cardboard tube
    • IvanC
    • Media item
    • b-100r port
    • Comments: 0
    • Album: Bass gear pics
  40. A

    Double Bass Jaco's Solo on Port of Entry

    Here's something silly and fun for your Saturday afternoon. Jaco's beastly (but likely sped up:) ) solo on Port of Entry, played on upright! I had to do it arco because I can't play that fast pizz (I tried!) and keep the articulation the same - which I think is the coolest part. Enjoy!
Top Bottom
Back