Ampeg SCR-DI used exclusively at my 1 and only gig situation; our church.
So, non-smoking and pet free. In excellent working order. There is good quality velcro pre-installed on the back for your convenience.
No trade interests at this time.
Will pay shipping charges to lower 48 United...
Ampeg SCR-DI used exclusively at my 1 and only gig situation; our church.
So, non-smoking and pet free. In excellent working order. There is good quality velcro pre-installed on the back for your convenience.
No trade interests at this time.
Will pay shipping charges to lower 48 United...
I have been using my SCR-DI live for several years now. I power it with a One Spot (never had a 9 volt battery in the pedal). Today out of nowhere I'm getting a loud squeal in the signal, and no bass output to the board. I have read about the battery issue, but like a said, I've only ever ran...
Hey folks,
Not sure if this is the right forum to post this question, I think it can also be placed into Recording forums, but I hope you can help me.
I got an Ampeg SCR-DI box a few weeks ago and reading the manual, it seems I could use the "Thru" output to send a clean signal in parallel...
I stumbled across this old thread while looking for a replacement volume pot for my SCR-DI. I had also noticed that the XLR out is noticeably hotter than the 1/4" line out, and this appears to be true per the manual as well.
My question is specifically related to this comment:
The quoted...
Thanks to this website I found an Ampeg SCR-DI. Thank you to @Flatwound for sending out the pedal so soon. This thing looks awesome, and it's way better than the Bad Monkey I was using to record my bass! If anyone is looking for one it's great; Hope you got space because this thing is...
Hi,
I have a strange problem with buzz. When I plug my player p bass into Ampeg scr-di preamp it buzzes. If i roll the tone knob completely off, the buzz stops. I took pickguard and bridge off to see, whether soldering was ok, and it was. I also took tone and volume knob caps off. After putting...
Ampeg SCR-DI in perfect working order with box and instruction. And if you buy it today I'll even throw in a handy dandy wall wart. Condition is used but not neglected. It's a matte finish and shows minor scuffs really well. See pics. Price is shipped CONUS. Prefer PayPal. Will ship to anywhere...
Ampeg SCR-DI in perfect working order with box and instruction. And if you buy it today I'll even throw in a handy dandy wall wart. Condition is used but not neglected. It's a matte finish and shows minor scuffs really well. See pics. Price is shipped CONUS. Prefer PayPal. Will ship to anywhere...
Used mainly as desktop headphone amp only. I ran through a power amp a few times, and it sounded great, but never gigged it. Functions perfectly, chassis has a few marks, and a couple of marks I made for settings didn’t wipe off completely. No big deal. Price includes shipping.
Used mainly as desktop headphone amp only. I ran through a power amp a few times, and it sounded great, but never gigged it. Functions perfectly, chassis has a few marks, and a couple of marks I made for settings didn’t wipe off completely. No big deal. Price includes shipping.
I've been looking online for opinions and opinions are incredibly dividing, I have a Ampeg portaflex pf350 head and a 115hf Cab, Currently using a behringer bd21 which I think it's pretty good but looking forward to upgrade, the AUX and headphone inputs are a REALLY good thing for me, to...
Basically new-in-box Spectradrive pedal preamp/DI. Gave into GAS and bought this a couple of months ago on a whim for something different and to compare against my SCR-DI. Only used a handful of times in my smoke-free home.
Great device for anyone looking for studio quality headphone practice...
Basically new-in-box Spectradrive pedal preamp/DI. Gave into GAS and bought this a couple of months ago on a whim for something different and to compare against my SCR-DI. Only used a handful of times in my smoke-free home.
Great device for anyone looking for studio quality headphone practice...
Ampeg SCR-DI pedal including original box, manual, and optional rubber feet. It was used lightly and is in excellent condition. It does have velcro on the back. Price is $150 including shipping to the CONUS. Paypal only please. No trades.
Ampeg SCR-DI pedal including original box, manual, and optional rubber feet. It was used lightly and is in excellent condition. It does have velcro on the back. Price is $150 including shipping to the CONUS. Paypal only please. No trades.
Classic Preamp: SOLD!
SCR-DI: SOLD!
Near mint, save for a tiny bit of logo wear on the SCR-DI and velcro (can remove velcro for you upon request). Comes with original box, never came with a manual as it's a pre-release version that I got a couple months before it was released to the public...
Classic Preamp: SOLD!
SCR-DI: SOLD!
Near mint, save for a tiny bit of logo wear on the SCR-DI and velcro (can remove velcro for you upon request). Comes with original box, never came with a manual as it's a pre-release version that I got a couple months before it was released to the public...
May Jimmy Forgive Me, but I'm selling my SCR-DI.
Here's the run-down if you need it:
https://ampeg.com/products/pedals/scr_di/
Used at Church and in our non-smoking home. Free Shipping to the lower 48 United States. Outside that, will be whatever it costs me to have the post office ship it to...
May Jimmy Forgive Me, but I'm selling my SCR-DI.
Here's the run-down if you need it:
https://ampeg.com/products/pedals/scr_di/
Used at Church and in our non-smoking home. Free Shipping to the lower 48 United States. Outside that, will be whatever it costs me to have the post office ship it to...
Heyo!
So I just got an ampeg scr-di. It's really a sweet little box that I'm very happy with, save one thing -- the hiss!
When the treble knob is turned up beyond 12, there's a good bit of background hiss (gets louder with more treble). Trying to figure out if my unit is faulty, or if this is...
This is in excellent shape. Comes with original box and manual. I ended up with a few of these and decided to let one go as I'm looking to fund a new rig setup.
$130 shipped in the continental U.S.
CLASSIC AMPEG TONE
Legacy Ampeg preamp and tone stack circuits
Wide range of authentic...
This is in excellent shape. Comes with original box and manual. I ended up with a few of these and decided to let one go as I'm looking to fund a new rig setup.
$130 shipped in the continental U.S.
CLASSIC AMPEG TONE
Legacy Ampeg preamp and tone stack circuits
Wide range of authentic...
Narrowed my search down to these two options (though also still somewhat tempted by para driver and EBS microbass II) and I was wondering which one handles other effects (primarily fuzz and distortion better). I know the tone differences between the two have been reviewed (though if you have...
My rig is pretty simply - a Behringer BDI 21 into a power amp. I have a few other Behringer pedals (OD, Chorus, Comp) in the mix but the BDI->PA is the core. I like Behringer.
I'm thinking about upgrading the BDI to the SCR-DI. Nothing wrong with the Behringer but I've been running it for quite...
Perfect condition Ampeg SCR-DI. Great pedal, just not using it...it was kind of an impulse purchase. Includes original box and 1 extra screw in rubber foot in case you lose one!
$140 shipped CONUS only.
Perfect condition Ampeg SCR-DI. Great pedal, just not using it...it was kind of an impulse purchase. Includes original box and 1 extra screw in rubber foot in case you lose one!
$140 shipped CONUS only.
Ampeg SCR-DI for sale only $130.00 shipped. PayPal and CONUS only please. Not orginal owner, but pedal is in good shape and works as it should. Comes with box, paperwork and screw In feet. Thanks for looking!
Ampeg SCR-DI for sale only $130.00 shipped. PayPal and CONUS only please. Not orginal owner, but pedal is in good shape and works as it should. Comes with box, paperwork and screw In feet. Thanks for looking!
Hey guys so I have an Ampeg SCR-DI PreAmp and want to set up a simple pedal board that includes the preAmp. Was wondering if anyone else has the Ampeg PreAmp or really any preamp/Di box and wondering how you chain your effects. Why do you take that approach?
the other pedals that Im getting is...