settings

Hello guys and greetings from Germany. First of all, sorry for my english. Im looking forward to built myself a new Pedalboard around the HX Stomp as my centerpiece of sounds. But there are a few problems for me to solve first. I hope you can help me. Signalpath on my actual PedalBoard: SHURE...

Can someone please take the time to give some tips and advice on my tone, it would be really appreciated since I cant figure it out myself. I play with a pick and I have a tone that I kind of like on my A,D,G stings but they get annoying to listen to fast and sound very bright even at low...

I’ve been tryna get the bass tone for Arctic Monkeys, specifically Worst Nightmare. I have a ibanez gsr200 and a rumble 100 v3. Can someone help me

Would anyone like to post a pic of your preferred Fishman EQ settings? (Especially if you are using a Fender Rumble 100, but I know that is not typical, but with anything will probably give me an idea in terms of gain, treble, bass, mids.). Also, with the Fishman, what to you do with the gain...

TT-800 settings

Hi peeps, I'm a proud owner of Atomic Bass Box, and I'm in love with it! Haven't even tried the app yet, because I'm really happy with the tones I can dial in directly. Only thing I would wish for would be some ways to save presets without the need to remember all the settings...Meaning eg...

My question is what EQ settings (e.g. Hz in a graphical EQ, or equivalent) would you use to revoice Fender basses to sound like each other? I have active pickups in my jazz bass and love it 90% of the time. Sometimes though I just want the warmth and bounce of a passive P. I know the stock...

I just recently purchased a Ampeg SCR-DI to get more of that Ampeg tone. I’m a noob when it comes to setting up my tone but just wanted to get some ideas to get perhaps a good SVT or Clean tone? Any other suggestions would be appreciated.

Hey all, I recently stumbled upon this and i'm desperate to get that tone when the 4 string bass kicks in, I've got a Dingwall NG3 and an Darkglass Alpha Omega Ultra pedal but im hopeless when it comes to dialling stuff in, Ive fiddled for hours and can't get anything but a flubby low end and...

I’m a new D-800+ owner. I have been playing a GK 700rb-ii for years. GK discontinued the 700rb so I decided to go with the D-800+ because it seemed closest tonally to what I’m familiar with and I wanted to try something new. I ran the 700rb pretty much flat with a boost in the high and lo mids...

I still use my Zoom G1Xon in my bass setup, which though I have used a hack program to install several other effect models on from the same generation Zoom units (G1(X)on / B1(X)on / MS-50G / MS-60B / MS-70CDR). I normally exclusively use it for different reverb patches, among that my always on...

So the idea for this thread comes from a very recent experience. I got a SBMM Ray35 a while back and I really like it so I've been gigging it regularly. 95% of the time I play in an 80s cover band and the Ray sits great in the mix. Other than running a sansamp pedal for a couple different drive...

Hey TB, Short and sweet: What dirt role is your Subspace filling and what are your settings? I'm looking for inspiration. I have 3 dirt pedals on my board-- the 3Leaf Doom 2, the Broughton Locust Star, and the Subspace. The Subspace used to be filling the role of "very subtle growling/purring...

I am wanting to know how to get a bass tone like Alex Wilson from the doom metal band Iron Claw (i.e., Clawstrophobia, Skullcrusher). He primarily used Simms-Watts amps, afaik. There is a WEM stack pictured here. I believe he used Selmer as well. And some kind of Fender bass. I would like...

I was browsing the TB settings page and noticed this option. Hmmm... Why hide avatars? Does anyone do this?

Hey everyone, I would like to ask the help of anyone who uses the Source Audio Aftershock pedal. Wonderful pedal but full of options. I play in a garage rock band. '60 rock, rock'n'roll, rockabilly, pre-punk era. I usually use a simulated tube amp driver sound for most of the set and a fuzz...

why do soo few amps have them? I recetly played an amp with dedicated low pass/high pass filters built in and I loved the ability to quickly control all of my lower frequencies as well as all of the high end. Felt much more natural to do it that way and cleared up my sound in the room. Isn't...

So here's my dilemma: I'm trying to build a decent-but-cheap rig to get a sound similar to Royal Blood. If you haven't heard of them yet, think The White Stripes, but backwards. The bassist/lead singer, Mike Kerr, is using multiple guitar and bass amps with pitch-shifting pedals to build a...

I juat purchased a Kemper Stage and am totally new to the platform. Coming from a Boss ES8 controlled pedal board and ampless set up, I am familiar with a lot of concepts, but I am curious about how Kemper users on TB run theirs. Favourite presets, profiles, cabs, ways of getting your...

After playing straightforward 70's rock for years the band wants to put a few funky tunes in the set and they want it a bit ... slappy. I've never needed to learn to slap but now it's imperative. The right hand techniques I can work out but it's the amp settings I'm struggling with, help me...

I've recently gotten an ehx bass mono synth and a moog ep-3 expression pedal... anyone have some good setting suggestions? I've fiddled around, but can't seem to get it dialed in like I want. I've also got it at the front of my pedal chain which includes a compressor, OD, distortion, and chorus...

After getting pretty comfortable with my HL, I've finally started tweaking the Attack/Release/High Pass Filter settings within the Darkglass suite. I've read up on the basics of attack/release, but I was curious if anyone is able to provide a layman's description of each of the four base...

Does anyone have some recommendations for BBBOD settings? Aiming for tubes on verge of break up sound - thanks.

I have a little bit of time playing jazz, but I don't get the right tone that I want. I have a fender precision with flats on it, have a peavey amp (3 band eq) and a Galien Kruger (5 band qb), but I never find the right spot or tone on those amps. Can someone tell me how do you set up your amp...

Hey everyone, For pedals with lots of knobs (6 or more) I've been considering just putting duct tape on my stuff to hold down those hard to dial in pedals. So if anyone does this or uses any other similar ideas let me know. Cheers, Sam.

I am having a bit of trouble dialing in my BX500 through my BRX10.2 cab. I was wondering if anyone had any suggestions or could share their exact current settings. Just to give me some things to try... The only time I can get close to a sound that I like is with the following setup, If you...

We've been using an XR18 for about a year now but I recently started using a laptop at gigs to tweak my own IEM mix. I started looking at how our sound guy has my bass channel configured for the mains and I was curious to see how some of you configure your bass channel. I play a Fender Jazz...

I’ve been a professional musician for more than 30 years. As a pro, I’ve played Keyboards, Guitar, Bass and Drums. While it took years to perfect the sound of each rig live, bass is by far the one that takes the most knowledge and skill to get a great sound with live. I say this because of my...

I see a lot of posts from people who have no interest in knobs and switches and simply prefer passive basses. I get that some people will prefer passive and only play passive, and that's fine as far as I'm concerned. I have no problem with anyone's preferences. But then I also see posts from...

I believe this pedal and the Source Audio company to be at the forefront of effects innovations and versatility. However I have bought a Manta Filter almost a year ago based on watching every single youtube video that reviews this pedal and reading threads here and elsewhere and heavily GASing...

Just replaced the bridge cover with a nice cove bezel. Of course this changed the pickup height and I didn’t measure it before removing. Is there a standard set of measurements from the top of the pickups to the bottom of the strings for the bridge and neck pickups for that classic ric sound?

Big Red is kind of old junk these days I guess but I'm hoping someone has enough knowledge to help me get some decent sounds from mine. I've been out of band situations for a few years and just the other day got myself a spot in a Black Sabbath tribute band. I have the old GT-6B hanging around...

I recently picked up the EHX Hot tubes nano pedal, and I am trying to dial in a good sound. I don't want the farty overdriven tube sound . I just want it to have a slightly driving, bright tone I can run all the time , as an overall tone boost. I will use this pedal in two bands - one playing...

Hello all! So I'm trying to recreate a sound I played on the Pitchfork on the Pog2. I love this setting on the Pitchfork: Shift on P5 and blend at 11:30 with the Dual at the center position. To those familiar with both of those pedals, I'm wondering if anyone knows if there's a way to get...

So I recently picked up a used TC Electronic BG250-210 and love it but am finding it a little confusing. The tone stack has me slightly confused and was wondering if any of you have a suggestion or two for the settings. I pretty much play anything but currently have a focus on Jazz and classic...

I have a Mesa D800+ paired with a Subway 115 and yesterday I noticed while at a gig it started to peak often the led stayed on the entire time. I’m wondering if this is normal or is there anything i can do differently setting wise @agedhorse hopefully you can give some insight.

There is this bass sound that I hear in a lot of music that I listen to, but messing with tone controls, different picks, input levels, I still cant get anywhere close to this type of sound Stereolab: It's nice, clicky, picked sound... Klaus Johann Grobe: Forever Pavot Almost like a...

I love my Cat Tail, but I'm torn as to what sounds "best" with it. I love the toggle switch all the way down (quietest setting) since it seems to have the most cut, but this setting also seems to have the least bass. Middle position is nice but a bit too granular. Anyhow, just curious to see...

I recently bought a SR30th5II bass - the semi acoustic Depending on what speaker I use the sound is sometimes a bit boomy, and read that many feel that the electronic is not good. So....I alligator clipped an output directly from the volume pot and the bass sounds a lot cleaner. Next I tried...

I'm using one recently with Ibanez SRs thru Peavey SS and Class D heads. I tried the recommended settings and wound up with this ... ... but I'm still learning my way around it. Looking for something that will tame notes when I get too heavy handed, even out string volume, and help with...