[Help] Musicman Stingray HH Wiring Diagram

J

James Beard

Jul 28, 2021
6
0
1,586
#1
Hi there.. I’m newbie..

I just got a used bass (OLP MM3) that have been modified to have the same electronic configuration as EBMM Sringray HH by previous owner using 2 GnL L2500 passive pickups (neck & bridge), 3 band stingray 35 preamps, and 5-way lever switch (i believe its not a super switch, only got 8 poles).. the configuration of 5-way pickup selector is not same to the EBMM Stingray HH.. so I want to change the configuration to the original EBMM Stingray HH..
Is there any of you that can help me to share a wiring diagram/ scheme, how exactly each of the wire from both pickups attached to the 5-way lever super switch?
I’ve been looking for this diagram for few weeks, just got this pickup config diagram below:

ps : I just need a wiring diagram that exactly same used on EBMM Stingray HH from pickups to the switch.. from switch to preamps it’s already set

thanks !!
 

Attachments

  • 20A35EFA-85ED-44E1-B0F7-867BF4C28DF1.png
    20A35EFA-85ED-44E1-B0F7-867BF4C28DF1.png
    22.4 KB · Views: 2,883
Last edited:
#2
I made a thread about this not too long ago. I couldn't find a diagram so I had to design and draw up my own. Pickups are wired in parallel. This will be easier to read if you have a similar switch found in stingrays.

ihbyiuhkuikj.jpg
 
  • Like
Reactions: James Beard
#3
lavaxtris said:
I made a thread about this not too long ago. I couldn't find a diagram so I had to design and draw up my own. Pickups are wired in parallel. This will be easier to read if you have a similar switch found in stingrays.

View attachment 4348830
Click to expand...

Thanks you so much :))

Can you please give a note for the black & red wire attached to the switch (code number 1 & 2) is refer to… which one is the bridge & neck? :D
 
#4
James Beard said:
Thanks you so much :))

Can you please give a note for the black & red wire attached to the switch (code number 1 & 2) is refer to… which one is the bridge & neck? :D
Click to expand...
The wires going off the top of the pic are the bridge, and the bottom are the neck. The silver, white and green cables all get wired to a ground. The black cable going from either side of the switch to the bottom of the pic gets wired to the hot input (white) on the preamp. Make sure to also ground the black input on the preamp.
 
  • Like
Reactions: James Beard
#5
lavaxtris said:
The wires going off the top of the pic are the bridge, and the bottom are the neck. The silver, white and green cables all get wired to a ground. The black cable going from either side of the switch to the bottom of the pic gets wired to the hot input (white) on the preamp. Make sure to also ground the black input on the preamp.
Click to expand...

noted !! Thanks man.. you saved my life ✌️
 
#8
Hello,


I’m reopening this post from June.
I'm having quite a few issues with the connection of the switch in my Ray34 HH.
Would anyone be able to validate this diagram for me?
And also confirm the color of each wire for each coil?

Thank you in advance.


1727028509322.png
 
You must log in or register to reply here.
Top Bottom
Back