Help with SA Ultrawave (bass)

W

Wahfullz

Sep 5, 2023
2
1
281
#1
New to the Ultrawave. So far I've been using it with the presets and have been really liking it.

I've played around with the desktop editor a bit, just learning how it all works. I haven't made my own patches or anything yet.

My question is about it having stereo ins and outs. Is there a way to make a preset where I can run (example) Input 1 to Output 1 with just a dry signal and then have Input 2/Output 2 having a fuzz coming out of it.

I will be running things in stereo and would like to keep the overall pedal count down and this would help out quite a bit.

Thank you.
 
#2
Wahfullz said:
New to the Ultrawave. So far I've been using it with the presets and have been really liking it.

I've played around with the desktop editor a bit, just learning how it all works. I haven't made my own patches or anything yet.

My question is about it having stereo ins and outs. Is there a way to make a preset where I can run (example) Input 1 to Output 1 with just a dry signal and then have Input 2/Output 2 having a fuzz coming out of it.

I will be running things in stereo and would like to keep the overall pedal count down and this would help out quite a bit.

Thank you.
Click to expand...
you can have one channel set clean and flat and the other fuzz. You can also have your "clean" channel setup to just do compression, or EQ, or both.
 
  • Like
Reactions: actualbeaunz, mdalamond and J-phatt
#3
Derek Williams said:
you can have one channel set clean and flat and the other fuzz. You can also have your "clean" channel setup to just do compression, or EQ, or both.
Click to expand...
An awful lot of the device parameters can be set very simply using the Neuro App via the effect unit’s 1/8” TRS jack running a stereo cord from the audio out of an iPad. Newer Apple devices of course won’t work because they eliminated the port in their ongoing quest for noncompliance of their devices with any existing platform that isn’t also Apple. But if you have an older iPad (3 yrs is ANCIENT to Apple) you can handily change settings in the Neuro app.
 
  • Like
Reactions: actualbeaunz
#4
J-phatt said:
An awful lot of the device parameters can be set very simply using the Neuro App via the effect unit’s 1/8” TRS jack running a stereo cord from the audio out of an iPad. Newer Apple devices of course won’t work because they eliminated the port in their ongoing quest for noncompliance of their devices with any existing platform that isn’t also Apple. But if you have an older iPad (3 yrs is ANCIENT to Apple) you can handily change settings in the Neuro app.
Click to expand...
Easier to just use USB with apple devices
 
  • Like
Reactions: rsmith601
You must log in or register to reply here.
Top Bottom
Back