I'm dumb, and need help w/ Pedal Power Supply.. :(

[DanBass]

Sorry in advance, my experience with these is NADA, and I am tired of the mess of supply cables littering my board. It's silly and figured I should utilize this thing.

So I picked up the Voodoo Labs Pedal Power Plus 2.. And admittedly, it has sat in the box for months. I took at look at the manual, and I am pretty intelligent, but I'll be damned if this still doesn't confuse me.

So this what I have on my board:

AMP - MXR Bass DI Plus --> EH Bass Clone --> MXR Phase 90 --> Wilson Freaker Wah --> Agilar Octamizer --> DigiTech Drop --> Line 6 M5 --> BASS

Anyhoo, looking at the power, I see 1-4 (and above it ACA) .... the 5-6 (and above that L6) and then 7-8 and above that SAG.. then I see the little switches at the bottom...

God, it makes me sound ridiculous, so again, my apologies. (bows head)

I just want to make sure I hook these up right and nothing fries, blows up, or just flat out doesn't work. (The latter is ok, the first two, not so much.. lol)

Thanks as always!

 

[6-3-2]

From looking at images it seems like 1-6 can be set to either 9 or 12 volts. There's switches on the bottom to change that voltage. It looks like SAG 8-7 have knobs where you can adjust the voltage from 4 up to 9. Sag, as far as I know, is a dying battery effect that some people like with certain effects. So, I'd say adjust everything to 9 volts unless some pedals needs more.

 

[ceetee]

SAG dial controls to adjust variable voltage 4V-9V (outs 7 & 8)

There are two rotary knobs above the outlets to adjust 7 & 8.

L6 give you 200mA vs 100mA for the other outputs. In the end this shouldn't matter because the important measure is the Overall mA you are plugging in. As far as I know/believe. Plug yr M5 and the digitech into the L6s.

Look up the power consumption of yr pedals.