Looking to replace SR1206 ADX6 pickups

[Netmaster1978]

I have an 1994 Ibanez SR1206 model with active pickups...and have just recently had my stock bridge ADX6 give up the ghost. I've been trying to find replacements but I cant seem to find any. My soapbars are 39mmx105mm (1.5" x 4.1") with exactly 4" from screw hole to screw hole. The 6-string spacing is approx 1/2" in-between each one with a total of 82mm from B string to C string at the base of the Bridge pickup (77mm at the neck pickup).
All of the pups ive found seem to come a few mm shy of fitting like my stock ADX6's.

Do the EMG 40s work at all? The EMG 40PXs look close, but still look just a tad off....would they still work??
Has anyone ever tried SIMS Super-Quads in a SR1206?

Any help is greatly appreciated! Thank you in advance!

 

[ballpointmusic]

It appears that I might be able to answer the query. Long story short, I had a couple of EMG40DC lying around and they seem to fit well. They even fit with the original screw holes. I was worried about them not tracking well the B and the C, but it appears to be a non-issue.

Now, the jack is another can of worms. Most Ibanez basses have a barrel jack, so you will have to solder it or find a different way to attach the connectors. I was in a hurry, so I did this.

 

[Netmaster1978]

It appears that I might be able to answer the query. Long story short, I had a couple of EMG40DC lying around and they seem to fit well. They even fit with the original screw holes. I was worried about them not tracking well the B and the C, but it appears to be a non-issue.

Now, the jack is another can of worms. Most Ibanez basses have a barrel jack, so you will have to solder it or find a different way to attach the connectors. I was in a hurry, so I did this.

Thank you so much for the Reply! I appreciate your feedback and help, very much!
I will try these, Thank you! Cheers!