Need info about these wires

[Mox]

I need to know what type of wire can I take to replace these ones:

Can you please give me some info about them?
Thanks!

 

[Wasnex]

Everything you need to know is printed on the wire. If the existing wire is long enough, just strip the ends off and resolder.

 

[Mox]

Everything you need to know is printed on the wire. If the existing wire is long enough, just strip the ends off and resolder.

Well, the problem is that one wire is no more long enough to resolder.

 

[Wasnex]

Well, the problem is that one wire is no more long enough to resolder.

So Google the numbers and letters on the wire and order a bit more. It's a bit fuzzy in your photo, but I believe the info you need is "AWM 1007 22"

 

[Matt Liebenau]

In the US, go to Auto Zone or NAPA or somewhere similar and get a roll of hookup wire. If, as Wasnex said, one of the numbers on the wire is indeed 22 it’s probably 22 gauge wire but anything around there will work. You should even have several colors to choose from.

 

[Wasnex]

In the US, go to Auto Zone or NAPA or somewhere similar and get a roll of hookup wire. If, as Wasnex said, one of the numbers on the wire is indeed 22 it’s probably 22 gauge wire but anything around there will work. You should even have several colors to choose from.

You can also buy wire by the foot at many hardware stores, but it probably won't be AWM 1007. I am not wire expert, but AWM 1007 is probably overkill for this application.

Here's an AWM 1007 spec sheet so you can see what characteristics it has: https://www.nationalwire.com/pdf/UL-AWM-1007.pdf


Wire comes in solid and stranded...you definitely want stranded.

 

[Mox]

Ok guys, thank you alot!