Can anyone help identify the correct tool to adjust the truss rod on a Roscoe SKB 5. I've gone through all the common tools for set-up on other basses but have nothing that fits the Roscoe. Any help, tips, or clues would be greatly appreciated.
Enjoy the benefits of a premium membership!
Upgrade Account
-
Welcome to TalkBass! Want to remove ads? Register an account and login to see fewer ads, and become a Supporting Member to remove almost all ads.
Roscoe SKB Truss Rod
- Thread starter Matt Sabell
- Start date
How did you cut the Allen key? If you used a hacksaw, throw the key away and buy a good one, as the steel is too soft. You don't want the key to start stripping as it'll damage the nut too. With hard steel, you can score it with a Dremel cut off disc, and snap it in a vise at the score line.
Edit: Sorry, this advice is directed to the original poster.
I have the diamond-edged Dremel cut-off wheels which makes short work of virtually anything.
Riis
The fiber reinforced wheels work. A bit slower.
Even the little abrasive wheels will work, too. Might take two of them.
If it's a good, hard Allen key wrench it will defeat a hacksaw blade in a few strokes.
Even the little abrasive wheels will work, too. Might take two of them.
If it's a good, hard Allen key wrench it will defeat a hacksaw blade in a few strokes.
Unfortunately, abrasive cutoff wheels will heat the steel and remove the temper which makes it softer, exactly where you want it to be hard. That's why I suggested scoring it and snapping it on the score line.
Which is why you keep water handy to cool the work. Spray bottle works just great.
If you have a stationary grinder, especially one with a well, it's pretty easy to keep the temper.
Lots of ways to get it done safely.