Hidy-ho. I've been playing this 2008 Warwick Corvette Standard 5 since it was new, and it's always been a quiet bass. Until yesterday. Now it's making all kinds of racket, a loud buzz (not a hum), doesn't matter which amp or which outlet I plug it into. My P-bass is dead silent in the same scenario, as is my Jazz.
I took the bridge off and made sure the ground was properly seated in the cavity, and I re-soldered the connections on the jack, to no effect.
The buzz is like any other, where it fades as I turn away from my amp, but I have always sat in the same chair to practice, at the same distance from my amp, and it never made this kind of noise. The buzz fades a bit when I turn the tone control all the way down.
Over time, the pots have become more and more "slack"; they turn with very little resistance.
I'm considering simply replacing the guts on this bass, is there a US source for the pre-wired harness that's available out of Germany on their website?
Thanks in advance for any thoughts or ideas on this.
I took the bridge off and made sure the ground was properly seated in the cavity, and I re-soldered the connections on the jack, to no effect.
The buzz is like any other, where it fades as I turn away from my amp, but I have always sat in the same chair to practice, at the same distance from my amp, and it never made this kind of noise. The buzz fades a bit when I turn the tone control all the way down.
Over time, the pots have become more and more "slack"; they turn with very little resistance.
I'm considering simply replacing the guts on this bass, is there a US source for the pre-wired harness that's available out of Germany on their website?
Thanks in advance for any thoughts or ideas on this.