With CarvinAmps FOLDING, I need a new small affordable cabinet...

mikewalker

mikewalker

Supporting Member
Jul 30, 2017
8,441
20,186
1,981
Canada, Eh!
#1
Need a SMALL FOOTPRINT 8 ohm bass cabinet, not too deep.
To fit under my CARVIN MB10! Was aiming at the Carvin 115MBE, but they are all gone :(

IDEALLY 18" wide by 11.5" deep, but could go as big as say 19x14...
A depth closer to 12" is better though! (Pressed for space).
Power handing should be at least 200WRMS.

What is out there that isn't some swanky boutique item?
 
#4
Budget about usd 250 not including shipping, taxes ( I'm in Canada ).

Haven't seen any small carvin cabs on TB, ebay, or reverb... Zero used Carvin gear ever makes it up to Canada, at least not in my neck of the woods...

Oh, and Amazon has a great deal on a new one, but THEY WON'T SHIP TO CANADA...
 
Last edited:
#15
BadExample said:
It's not a state?
Click to expand...

No. No it's not.

:rollno:


mikewalker said:
Need a SMALL FOOTPRINT 8 ohm bass cabinet, not too deep.
To fit under my CARVIN MB10! Was aiming at the Carvin 115MBE, but they are all gone :(

IDEALLY 18" wide by 11.5" deep, but could go as big as say 19x14...
A depth closer to 12" is better though! (Pressed for space).
Power handing should be at least 200WRMS.

What is out there that isn't some swanky boutique item?
Click to expand...

I think you'll either have to be more flexible about your max dimensions, increase your budget, or go used.
  • Markbass has a few tiny cabs in their product line (NY/Ninja Traveler 1x12, 2x12, and 1x15) that would fit your criteria, but you'll definitely bust your budget (unless you find a good deal on a used one);
  • Traynor makes an affordable 1x15 that can handle your power requirements, but it's 18.5'' x 24'' x 18.25'', and even that is about 450 CAD new. There's a used one for 350$ in Edmonton's L&M, if that's where you happen to be located.
Either way, good luck on your search!
 
  • Like
Reactions: BadExample
#16
Thanks for the tips... 15 inches depth would pretty much max me out - short on floorspace up here!
My only credible lead so far seems to be Hartke 210XL ... If I can find a deal on one!
  • Dimensions: 14"(H) X 24"(W) X 12"(D)

    ( I would stand it on end and perch the MB10 on top...)
 
#18
Frank77 said:
No. No it's not.

:rollno:




I think you'll either have to be more flexible about your max dimensions, increase your budget, or go used.
  • Markbass has a few tiny cabs in their product line (NY/Ninja Traveler 1x12, 2x12, and 1x15) that would fit your criteria, but you'll definitely bust your budget (unless you find a good deal on a used one);
  • Traynor makes an affordable 1x15 that can handle your power requirements, but it's 18.5'' x 24'' x 18.25'', and even that is about 450 CAD new. There's a used one for 350$ in Edmonton's L&M, if that's where you happen to be located.
Either way, good luck on your search!
Click to expand...
:meh: And it was mt favorite state, or so I thought :meh:

:laugh::laugh::laugh:
 
#19
BadExample said:
115MBE Micro Bass Extension Cabinet

Best bet, will work and sound good with your combo. 12" deep. Call it in you might get something extra. A foot switch or cover or something.
Click to expand...
I have one that is unused, still in the shipping wrap. I ordered one from Carvin just as they were shutting down, I didn't hear anything, so I thought it was not happening. Then I got it (without any notice) after I had already picked up another cab that is not returnable. There is a local guy that wants to give me $180 for it. I don't know how much shipping to Canada is, but it looks like it is well within your budget.
 
You must log in or register to reply here.
Top Bottom
Back