buzz

  1. LaBottomMe

    Shim to Fix Buzz on Top Frets?

    Bought a MIJ P-bass about a year ago. (I'm mainly a guitarist, so wanted a bass for recording, etc.) Haven't played it much and never bothered with the setup until now. - neck looks very straight, so figured truss rod adjustment not necessary (pressing first fret and 16th and string still a...
  2. M

    Higher action required for Trubass 88 to avoid fret buzz?

    Hi Have just tried Rotosound Trubass on one of my basses, I was really pleased to find that this bass that is usually a little out with intonation is now strangely pretty much bang on however I have found that there is fret buzz at 12th and 15th fret of the A and D string that is not there with...
  3. organworthyplayer337

    Bad Fret Buzz On Higher Frets. Please Help!

    I just bought a bass and when setting it up I realized the bass has bad fret buzz on the higher frets. It starts around fret 14/15, and it's almost like a "fretting out" sound. The note doesn't ring out, it gets cut out. And if I drop the saddles even a little, the note doesn't even exist and...
  4. M

    jazz bass fret buzz

    I just got myself a new fender jazz bass opal white. It's very nice but my E string has alot of fret buzz. If I play on the bridge pickup it's fine but if I play on the neck pickup the buzz is very intense. Is it normal or should I go see someone to adjust it?.
  5. primussucks9126

    EMG GZR - Bad Buzz. Suggestions?

    I just got another one of these to install in an Ibanez TMB-100. No matter how I install this thing, I get an extreme buzz. Right now I just have it going Jack- Volume. Any ideas? Thanks! Paul I searched and couldn't find anyone with this specific issue.
  6. petjaolvi

    Music Man SUB fret buzz on the A string (10th fret only)

    Hello and sorry if this has been asked and answered before, I tried searching but nothing was really like my problem. So I have this Music Man SUB USA (one of those older ones, don't remember the exact year) which I bought used. It has significant fret buzz only on the 10th fret of the A...
  7. secondbestcody

    A string fret buzz

    Before I start, I have a Fender Aerodyne jazz. The A string buzzes on the 2nd or 3rd fret when I pluck the open string. I've checked the frets, they seem to be level. No other strings buzz, just the open A. I've heard this is somewhat common, just looking for some advice.
  8. wubalubadubdub

    Loud buzz - active bass

    It has been some time that my Cort gb74 (active only, one single coil and one hambucker) makes an annoying buzz. In this particular instrument you can "switch off" the equalizer, and while it's off the noise (almost) completely disappears, so I thought that maybe there is some issue inside the...
  9. alaskaleftybass

    Considering buying MTD Kingston Lefty-- Buzz Feiten Tuning Concerns

    Greetings, TB'ers. I've been on the prowl for a new lefty bass. My preference is a fast 38mm maple fretboard neck, slim stained body, MusicMan pickup. I found an MTD Kingston lefty amber colored bass/maple fretboard/MusicMan style pickup. I absolutely love the look and love MusicMan style...
  10. Jean-Christophe

    Fret Buzz on Epiphone EB-3

    Hi everyone, I'm pretty new to this forum, so hi! I just bought an Epiphone EB-3, pretty satisfied, play really well. The only problem, I got major fret buzz on it. Almost on every fret there is a small or pretty big buzz. Would like to know what should I do. Cheers, JC
  11. wubalubadubdub

    What is wrong with my bass pt.2

    Here we go again. Same bass, different problem. It has been some time already that my Cort gb74 (fully active bass) makes an annoying buzz (I am sure that is the bass and not the amp because I tried it with another instrument and there was no noise), but whenever I touch the bridge, the...
  12. NoiseNinja

    Could two shallow nut slots (too high strings at the nut) be cause of fret buzz?

    I'm beginning to suspect that too high string action at the nut caused by too shallow nut slots are causing the fret buzz related to lowering the strings on my Ibanez Mikro bellow the 3,5mm (0,138") mark E string side 12th fret and 3,0mm (0.118") mark G string side on 12th fret. Could that be...
  13. Being and Bass

    Hammer-on Buzz

    My Ibanez SR1206 has a strange issue: I get fret buzz starting around fret 7, but only when I hammer-on from an open string. If the string is fretted the hammer is fine, but I get a jangle otherwise. I've already adjusted the truss and action so I don't think it is that (or, if it is, it is out...
  14. C_Becker

    Epiphone Viola w/ flatwounds, weird overtones / buzz

    Hey Talkbass folks, I need some help with my Epi bass. It has a weird overtone that is especially noticeable on the lower notes. Its not fret buzz, it rather sounds like something is vibrating with the string or as if the string itself gives off an overtone. If I pluck really hard, I can hear...
  15. HeyBigZam

    E string rumble + fret and bridge buzz on SBMM Ray34

    A few days ago, I picked up a used SBMM Ray34. I wanted to play the instrument beforehand, but the area where we made the exchange had no socket to plug an amp into. Gave it a quick once over and decided the guy seemed nice enough, so I bought it. Fast forward a couple of days and now I'm...
  16. K

    Fret buzz with only 1 string

    I just got a new Squier bass from the Fender website and the 1st frets on each string buzzed pretty bad so I adjusted the height of the string and the buzzing is gone except for the G string. The buzzing won't go away on the 1st fret. All the other fret on the G string sound great except for the...
  17. Pedulla Buzz

    Pedulla Buzz

    Updated to include a HSC if this sells before my other bass up for sale. 2 bass enter. 1 bass leave. In a case, anyway.
    • Fretless:
      1. Y
    • Strings: 4
  18. naetog

    No longer available Pedulla Buzz

    TL;DR = Fantastic condition, swapped electronics, sexy. $1845.27 shipped OBO in a non original HSC. Other than the 3 dings the go through the finish, this bass is in amazing shape (especially a 30 year old bass!). Check the photos. Minimal wear on the finger board, the 3 blemishes, and some...
  19. J

    Fret Buzz - G string, 3rd Fret

    I recently picked up a MIM Fender P ("Noir") and restrung it with La Bella DTFs. After giving it a basic set-up (relief, action, intonation), the G string at the 3rd fret has developed a buzz. When I fret at the 1st, 2nd and 4th frets, no buzz. Could this be a high 4th fret that the string is...
  20. Pedulla Buzz 4 - signature - Previously owned by Will Lee

    Pedulla Buzz 4 - signature - Previously owned by Will Lee

    The Holy Grail of all fretless basses. This bass is in incredible condition, not perfect, but easily a 9/10. It is a beautiful signature AAAAA quilt in a glorious blue. Comes with original Pedulla hardshell case. The previous owner bought it from an auction that came with letter and picture...
    • Fretless:
      1. Y
    • Strings: 4
  21. lay a groove

    SOLD Pedulla Buzz 4 - signature - Previously owned by Will Lee

    The Holy Grail of all fretless basses. This bass is in incredible condition, not perfect, but easily a 9/10. It is a beautiful signature AAAAA quilt in a glorious blue. Comes with original Pedulla hardshell case. The previous owner bought it from an auction that came with letter and picture...
  22. D

    High action and high fret buzz

    I just bought a Squier Jaguar Bass a week ago, it sounds very nice, but for some reason i can't get the action as low as I want because it starts making some buzz on the high frets. Low frets and middle frets don't buzz, only high frets What should I do to get a lower action while getting rid of...
  23. F

    New fender jazz cs60s pickups installed, is this buzz normal?

    I paid a local luthier to set up my bass and install the new cs60s pups, but when I got home to play I noticed a moderate buzzing/humming sound. The noise stops while I am touching the strings, or any metal on the insutrument. I can hear the hum start as soon as i move my hand from the strings...
  24. ThatLeftyguy

    Constant buzz on 8-11th frets G string

    hey TB, I'm having an issue that I can't figure out. I'm getting bad buzz on the g string 8-11 frets. I've tried almost everything now. I have done a leveling twice and crowned them to my best ability with what I have, tried truss adjustments more relief, less relief, neck reset, adjusting...
  25. D

    Fender P bass Fret buzz question

    hi there, I need your help here. My fender P bass (american standard) has a fret buzz in the 5th fret, G string. When I play hard it is noticeable. I wanted to lower the strings (currently 3/32 in G string and E string) but I can't without having that annoying buzz. The neck is straight (0.12...
    • Don mata
    • Thread
    • buzz fender fender p fender p bass fret fret buzz precision bass
    • Replies: 1
    • Forum: Basses [BG]
  26. squish

    TC Electronic BH250 DI Buzz

    I’m trying to go direct to the board with my BH250 and the built-in DI is making a lot of buzz even with the power off. I’ve swapped electrical circuits (in the wall), power cords and cables to the board. There is no ground lift so no-go with that option. I’m considering opening her up to see if...
  27. TheIndieKid

    La Bella 760FL-MUS short scale flatwounds E string buzz?

    Does anyone else experience this issue? I've found my La Bella E string on my Mustang Bass is buzzy when gauging the relief of the neck and fretting two or three notes. However, it does not buzz when open. Is there a solution?
    • TheIndieKid
    • Thread
    • buzz e string flatwounds scale short short scale strings
    • Replies: 4
    • Forum: Strings [BG]
  28. lay a groove

    black hardware for Pedulla MVP / Buzz. 4string

    looking for a set of hardware for a Pedulla MVP / Buzz. I would ideally like to trade for the gold hardware that is on there right now. thanks!
  29. Pedulla Buzz fretless

    Pedulla Buzz fretless

    SOLD Pedulla Buzz 4 string fretless bass guitar This bass is probably from the late 1980s or early 1990s based on the feature set. Body and neck wood is flame maple, coated ebony lined fingerboard. Bartolini PJ pickups, gain-only preamp (9V, no active EQ). Controls are volume for each pickup...
    • Fretless:
      1. Y
    • Strings: 4
  30. brianrost

    SOLD Pedulla Buzz fretless

    SOLD Pedulla Buzz 4 string fretless bass guitar This bass is probably from the late 1980s or early 1990s based on the feature set. Body and neck wood is flame maple, coated ebony lined fingerboard. Bartolini PJ pickups, gain-only preamp (9V, no active EQ). Controls are volume for each pickup...
  31. A

    OD/distortion pedal with "coarse" / "gravel" sound - NOT buzz?

    Does the header make sense? (English is not my first language.) I currently have the industri standard VT Bass v1, and an EBS MultiDrive (a "two knob, one switch" design that is not too different from my go to setting on the VT). The problem is the same with both pedals. My regular bass sound...
  32. B

    Buzz on Fender Jazz Flea Signature is getting worse?!

    Hi! A few weeks ago I bought this amazing bass, great sound, I had a setup done, change strings, BUT... The buzz that I have since the beginning with the tones opened seems to get worse, louder... How it that possible? Has anyone had the same? I don't know if it's my impression but I feel like...
    • BassUK1987
    • Thread
    • buzz fender fender jazz flea jazz bass signature
    • Replies: 3
    • Forum: Basses [BG]
  33. R

    Charvel 3B Hum

    Hey everyone. This is my first post here. I picked up a Charvel 3b for really cheap, but it's got a pretty horrific electronic buzz, especially when I use the bridge J p/u (like, you can still hear it when I'm playing at full volume). I took it to a tech and he rewired it, checked the grounding...
  34. zevv

    Yamaha TRBX505 buzz driving me mad

    Hi all, I've been trying to hunt down a buzz in my bass for a few days, but not able to find the source. Recently I had an accident causing the bass to fall flat on its back (carpet floor), my guess is that this is when the rattle started. It's mainly prevalent when playing high up the E...
  35. DiabolusInMusic

    Buzz from over-shielding or shielding paint?

    Like many of us, I get the Best Bass Gear promo e-mails. I recently got one for the Aero dBuz Noise Cancelling Cable. It is basically a cable with a piece of metal you wear to prevent RF interference. It costs more than a quality shielding job but some might want to go this route. Anyway...
  36. '87 Pedulla Buzz Four String

    '87 Pedulla Buzz Four String

    Up for sale is my 1987 Pedulla Buzz four string. The bass is in excellent condition. When I purchased the bass it needed the fretboard refinished. I brought it to Mike Pedulla for the refinish. At that time I decided to have the entire bass refinished. I also asked if he would sign the...
    • Fretless:
      1. Y
    • Strings: 4
  37. LeonD

    SOLD '87 Pedulla Buzz Four String

    Up for sale is my 1987 Pedulla Buzz four string. The bass is in excellent condition. When I purchased the bass it needed the fretboard refinished. I brought it to Mike Pedulla for the refinish. At that time I decided to have the entire bass refinished. I also asked if he would sign the...
  38. Subersibo

    Emg gzr to active p - buzz problem

    Had the GZR in my mim p bass for the last few months and it is dead quiet but I bought the EMG P (solderless) to try out & I've been getting a lot of noise. Battery is brand new. The buzz goes away when I touch the shielding under the control plate but sound is a little distorted. I left the...
  39. Killed_by_Death

    Anyone else experience buzz with flats, but not with rounds, on the same bass?

    When I first got my BTB, I checked it over on every fret for buzz & there was none. Cut to a string change (EB Cobalt Flats) & the 7th fret on the A is buzzing with any kind of accents. Actually, I have to play lighter than normal for it not to buzz. Raised the action to 1/4", still there, but...
  40. Paladin54

    Ampeg BA108 vibration buzz

    I am using an Ampeg BA108 as monitor at church and rarely have it above 4 for volume. I am getting a lot of vibration buzz from it. I know it's only $100 new and not worth sending in somewhere to get fixed and it's not under warranty any more. Is there something I can do at home to fix this?
Top Bottom
Back