output

  1. P

    Bass Output Clipping?

    When I play my Ibanez SR505 through a clean amp sim and into my DAW it sounds as if the signal is clipping/phasing and I cannot work out why. I have recorded it on multiple setups and through a DI and have found that the signal leaving the bass is "clipping", nothing to do with my recording...
  2. johnsonabq

    output dynamics management

    Looking at the block diagram for my MB Subway D-800+ I see something called "Output Dynamics Management". Can someone explain exactly what this is? Is it some sort of compression? Thoughts? thx
  3. M

    Help! No output from Squier VM Jazz after replacing pickups

    Hi guys, need some help... Been spending all day racking my brains as to why i'm getting no output whatsoever after replacing the stock pickups with dimarzio ultra jazz pickups today. Can you look at my wiring and see if you see anything that looks suspect? Apologys for the very messy soldering...
  4. alaskaleftybass

    NAD Eden TN226: What is the 8ohm power output?

    Hi TB'ers. Not long ago I bought an Eden TN226 bass amp in brand new condition. The amp is very high quality. I've been trying to sell the amp at half the selling price but no one wants it. So, I might keep the amp and buy an Eden Terra Nova TN110 cab. The amp says 225 watts at 4 ohms. Why...
  5. 3alfa3

    MXR M81 Buffered or Hardwired 1/4 Output for my aplication?

    I plan to use MXR M81 as signal splitter without engaging EQ (pedal is going to be off, but connected to Power Supply). MXR M81 cannot give true bypass for 1/4 output if XLR output is active and i have 2 options for 1/4 output: hardwire or buffered. Should i use (via switch inside MXR M81)...
  6. el_Bajo_Verde

    Need to enlarge 1/2" output jack hole to 7/8"

    Just looking for advice on this situation. I have an Ibanez that has a low-quality barrel jack and I want to replace the barrel jack with an electrosocket jack mount and standard output jack. I do not own a vice, but I do own an electric drill. I am unsure if I should just use a 7/8 drill bit...
  7. D

    Ibanez sr 1300 low output

    Hi There i recently bought the ibanez sr 1300, is There any way to get a higher output? Ive tried moving the pickups closer to the strings but then i get stringpull Greatings from Sweden
  8. Mili

    Line level output to headphone?

    Hello my friends, How can i get a nice and real sound through my headphone just with line level output of my Preamp/DI pedal(MXR M81)? What kind of device i need? Thank you in advance.
    • Mili
    • Thread
    • headphone level line output preamp di
    • Replies: 31
    • Forum: Effects [BG]
  9. NoiseNinja

    How do I connect a simple DIY passive HPF to an input and an output jack plug?

    So I made a post in this thread Dropping the bass - love at 50Hz yesterday, and haven't got any answer yet, and probably won't since the thread and post will most likely, and in fact already have, be buried by other threads and posts, so turning to this this sub forum instead for my answer...
  10. spigmu

    Help ! : ) Which resistor to pad down out of control uke bass output?

    I've got a Rondo Hadean UKB-20, solid body active preamped piezo bass electronics, that clips like Jack Bruce at the lowest possible level and Lemmy at 5% higher. The level is far too hot at any level but the clipping is happening before it leaves the bass, not overloading the output. Rondo has...
  11. I

    Which output to use to connect VT Bass Deluxe to Audio Interface?

    Hello, I have just bought a VT Bass Deluxe and would like to know what is the best way to connect it to my Audient id14 Audio Interface. My bass is a MM Stingray 4 (active, hot output). Should I connect the VT Bass to Audient using the 6,5 mm jack output or am I better off using the XLR input...
  12. soaf

    Aria Pro II SB-1000 bass with weak output (please help!)

    I have an Aria Pro II SB-1000 with weak output (probably 20%). I have used a multimeter to test the preamp and it iis providing proper values (18v when connected to pins 1-3 with jack inserted, and 9v between pins 1 and 2, and between 2 and 3). I have tested the three wires coming from the...
  13. brushfirewolf

    Super low output after EMG GZR solderless install

    I just installed this set into a new P bass body (unshielded) and it's producing a ton of buzz when not touching any metal, but the biggest problem of all is the output. It's total crap. The volume pot seemingly does nothing until 80-90%. At 100% the output is about half that (comparing by ear)...
  14. M

    G&L L1000 - Low Output

    Hi, I recently picked up an early G&L L1000 exactly like I had some 30 some years ago. The pickup output seems low to me. The parallel seems ok, but the two single coil modes seem significantly lower than the parallel mode. Attached is a clip of all three modes in order parallel, single &...
  15. ChuckMann

    EDA 905 Piezo Issue

    I recently got a nice used Ibanez EDA 905 and am seriously loving it, but have one issue ,,, the Piezo on the "B" string has very low, "fuzzy" output. the connections appear to be good, and I can't find a solution. Can any of you folks offer any ideas for fixes/remedies? Thanks!
  16. cirrusbassman

    Need help understanding Mesa subway di gain output

    Im new here to posting, but have been lurking for some time and decided to jump in. Im having a little trouble understanding the gain on my di. I have been using it with a peavey cirrus 5 18v into active side of di. The problem I’m having is when using my new Lakland DJ5 passive bass into...
  17. Radial stage bug 48ub (Phantom Power DI with instrument output)
    Sold

    For sale Radial stage bug 48ub (Phantom Power DI with instrument output)

    Clever clever clever. Up to this box coming along, if you had a mic needing 48v phantom power, you could only go straight through the board... so what about small gigs and stage monitoring?? This Radial stage bug allows you to have your phantom power supply, send the usual xlr to front of house...
    £100.00
  18. Rabbie15

    SOLD Radial stage bug 48ub (Phantom Power DI with instrument output)

    Clever clever clever. Up to this box coming along, if you had a mic needing 48v phantom power, you could only go straight through the board... so what about small gigs and stage monitoring?? This Radial stage bug allows you to have your phantom power supply, send the usual xlr to front of house...
  19. Bflat

    Fender 400ps output transformer help please

    I should be able to do this, the math isn't that bad, but I keep confusing myself.....maybe old age. Here is my question: since the 400ps was made for 3 cabinets of 4 ohms with 3 secondaries and one primary with 6 6550's push pull and being switched on and off depending on how many outputs are...
  20. Accessories/Parts for an EMG Output Cable (solderless)
    Closed

    For trade Accessories/Parts for an EMG Output Cable (solderless)

    need an EMG solderless output cable: if you have an extra one sitting around, let me know what you need and i'll check my parts drawer. i have various strap buttons, knobs, pots, pickup screws, etc. thanks!
  21. bubba-b

    TRADED Accessories/Parts for an EMG Output Cable (solderless)

    need an EMG solderless output cable: if you have an extra one sitting around, let me know what you need and i'll check my parts drawer. i have various strap buttons, knobs, pots, pickup screws, etc. thanks!
  22. D

    replace rickenbacker output jack help

    hi all, I tried googling and the search function but I haven't found what I was looking for which is strange as google is my friend and it usually works. I am thinking about replacing my Rickenbacker 4003's output jack as it makes noise and frequently one of the pickups doesn't come through. I...
  23. jaminjamesp

    Session players and recording enthusiasts: low or high output pickups for recording direct?

    I'm an engineer/producer who ends up playing bass (through the magic of editing!) on a lot of the records I produce. Unless an artist insists on it, or I'm working in studio with a 60s era B-15N (or similar) I always record bass direct. My go-to signal chain in my studio is bass>Chandler...
  24. L

    TRS output jack question

    Hi everybody The output jack on my Danelectro Longhorn bass crackles. There seems to be no faults with the wires/solder connections. There's a bit of wiggle room in the jack, what I think is the problem is that when i wiggle the cable it looses contact with the ground. Here's the question: I...
  25. Horrors

    Xlr output signal too high - Mesa Big Block 750

    Hi !!! I own a big block 750 everything seem to work fine except for the Xlr output, signal is too high to be use, even with the Direct Output level to minimum ! Im not sure what can cause this ? Thanks
  26. MrUsefulAlien

    Quiet/Low output Gretsch G5440 LSB Hollowbody

    I've tried to search for this "issue" on the forum, and haven't found useful solutions. The issue: the output is super low on this bass. Pickups are stock and I've had the same results with both rounds and flats (have TI Jazz on rn) I use an outboard pre (Aguilar TH500) and that remedies the...
  27. GeoKinetic

    Split Output Tuners

    Hey guys, I realise there are a million threads about tuners but I'm after something specific. I'm using a fender tuner on my board right now, that has 2 outputs, but the footswitch is pretty dodgy, which makes it difficult cos I often need to press it in the middle of a song to turn off a...
  28. C

    which output is suitable for tuner? (Trace Elliot GP11)

    Hi, I have a Trace Elliot GP11 mkV C 500 combo; the GP11 preamp has a couple of outputs but none is marked as 'tuner out' as the preamp was made somewhere in the 80s. (I guess it wasn't common back then). Is it safe to connect one of the available outputs to a rack mount tuner? If so, which one...
  29. Crusher47

    Low output from MEC passive pickups

    I did a search but couldn't find anything... I have a new Warwick Streamer Rockbass with the passive MEC pickups. The output is very low. As a test, I took 3 guitars to band rehearsal last night, here are my findings: I'm using the same amp for all 3 --> Fender Rumble 500 2x10 combo <--...
  30. dindinbre

    Low and distorted output out of my Peavey KB60

    Hello! I have bought this monster several months ago and it played GREAT for keyboard amp, had big tone, no buzz, and was overall in good condition. I have played bass and music through it since first day, much better than PC speakers i own. Yesterday I started it up, LED blinked and turned off...
  31. tallboybass

    What is the absolute highest output passive humbucking pickup for a Jazz, bridge position?

    I haven't seen a definitive answer after searching, it has to fit in a standard sized J rout. Thank you, Alan
  32. steinny

    Super low output on bass side of Novax 8 string

    I just bought a dual-output Charlie Hunter Novax 8 string online -- the guitar output works fine, but the bass output is extremely weak. This particular guitar was disassembled and them reassembled, and I am concerned the wiring might not have been done properly -- the seller claims it worked...
  33. R

    Sire Marcus Miller V7 active output

    Bought a Sire Marcus Miller V7 and I realy dont like the active electronics in this bass, when I turn on the active side the bass it is slitly less volume/output that the passive side is this normal with your V7?
    • ruifgalmeida
    • Thread
    • active marcus marcus miller marcus miller v7 miller output sire v7
    • Replies: 3
    • Forum: Basses [BG]
  34. gregmon79

    Filling in an output jack hole....??

    I just modded my Ibanez ATK 300 with a Nuetrik locking jack. To be quick and to the point, I had to drill out almost an inch wide hole in the body to get this new jack in there coming from an old barrel jack. I’m happy with it. But what happens if that thing ever gets ripped out or something...
  35. Finnigan's wake

    "Barrel" output stereo jack issues.

    Hi folks i decided to install a preamp on my Fenix bass. The old jack output barrel was worn with a lug broken so i decided to purchase a new one: Input Output 1/4'' Stereo Mono Active Barrel Jack Socket Electric Guitar Bass | eBay Well, the problem is that the two short lugs are "positive"...
  36. M

    When Pedals Change Your Output Impedance

    I started a thread about input/output impedance years ago and I have a follow up question. If you have a buffer in your bass, or in the first pedal of your signal chain, with a very low output impedance, this is considered a good thing in terms of being able to drive long cables without signal...
  37. KohanMike

    Output Jack Tool

    I'm sure some of you are aware of this product, and may even have one, it's a tool designed to tighten the nut on the output jack without twisting the wiring inside. I was using a piece of clear plastic tubing and a small crescent wrench, which worked but was awkward. Today I thought I would...
  38. Treadstone71

    Fender PJ Mustang - why isn't the output jack grounded?

    Hi everyone, I recently bought one of those Fender PJ Mustang basses, and I liked it enough to buy it, but when I plugged it into a proper amp setup at rehearsal, I found the sound to be rather bland. Not bad mind you, just sort of...blah. Long story short, I ordered replacement pups (Geezer PJ...
  39. el murdoque

    Pedal board vs. different output basses

    Hi, the fact that my three favorite basses have quite different output levels recently became a problem. My Carvin LB75 from the nineties comes with active humbuckers is quite hot and a lot louder than my Ibanez BTB with Bartolinis, which is louder than my Dreizehnbass custom with custom PUs...
  40. el murdoque

    Sansamp Prgrammable BDDI Output

    Hi, i recently ran into the following problem: On my Sansamp, the three settings i use are a 'normal' tone, one that emulates a hard driven tube amp with quite some overdrive and one with less highs and big boomy lows. Setting one and three are fine. The boomy sound is set a little bit louder to...
Top Bottom
Back