Hi.
Its time to glue the fretboard but i dont know how thick it should be.
The bass is for me,not for sale.
The fretboard will be flat without radius.
I am thinking to make it 3 layer with wenge,maple,wenge, each layer is 3mm thick.
I have build a bass in the past with 7mm fretboard and it was...
I've searched for almost an hour on TB and elsewhere and haven't found one recommendation as to whether or not one should treat/oil a Jatoba fretboard.
I've learned that Jatoba is hard, not oily, and it finishes well. Another interesting fact, although not related to this particular topic -...
Story:
I side-shimmed neck on my bass to get correct neck angle and better string alignment. Afterwards I adjusted the setup, especially focusing on intonation since tension and string length changed. During that I used "cable" tuner, not my everyday clip-on because a) it feels more accurate b)...
I've always wondered this but haven't figured it out. Why does Fender (as well as other companies that use bolt-on necks) not sell maple fretboards with certain color bodies? If you want the new 5 string P bass with a maple board, you can only get it in black or olive. If you want it with a...
Fender Japan JB62M - these are no longer made, and this is the only one I’ve ever seen with a maple fretboard. It is possibly one-of-kind. Frets are also old style non-jumbo size. It was most likely a one-off special order in Japan in the mid-1990s. All original parts and strung with great...
Fender Japan JB62M - these are no longer made, and this is the only one I’ve ever seen with a maple fretboard. It is possibly one-of-kind. Frets are also old style non-jumbo size. It was most likely a one-off special order in Japan in the mid-1990s. All original parts and strung with great...
Hi I recently purchased a cheap Rogue Fret-less bass at musiciansfriend.com so I could try to learn to play the fretless bass. But the 26 inch fret-board is blank except for the small dots on the edge of the neck binding at 3/5/7 etc.
So I wanted to find a way to accurately mark the fret...
Looking for a PRS Gary Grainger 5-string with maple fretboard. Ten Top preferred. Am mostly interested in Faded Whale Blue, but open to all colors. Would also be interested in locating the GG5 in Leprechaun Tooth that was sold here several months ago. Open to cash sale or trade plus cash...
I noticed that strangely, I can easily find chord tones and scales going up the fretboard (from lower to higher pitched scale) – but its hard for me to find the chord tones and scales going down the fretboard (to lower pitch scale/inversion). - So the scale thats one octave lower than scale...
This bass gain popularity beeing a decent shortscale, great for the price and for some great, period. Now it seems that we have next generation, made of poplar body (instead of mahogany) and jatoba fretboard (instead of rosewood). Everything else seems to be same as old ones. Ofcourse, we...
hey, so i just picked up a ss squier vintage modified jaguar, and im having a bit of trouble. all the strings play really nicely except for the e string, which hits the fretboard when playing and makes a loud "clack." it feels very loose, even when in standard tuning. somebody suggested that i...
So, I’ve decided to add dot markers to the face of the ebonol fretboard of my Squier VM Fretless. However I’m acutely aware that it’s a synthetic material, and as such, may not like being drilled into!
Has anyone added dot markers to their VM Fretless board, or even simply drilled into ebonol...
I picked up a bass to use for learning to do setups and stuff and here is what I am trying to fix:
It is a 5-string bass. The Low B and E strings make a "clacking" sound (kinda like Fieldy's bass tone). Where would be the best place to start making adjustments to try and get rid of the...
Hello everyone!
Couple of questions in one post bcause dont want to flood in this forum.
Bought an Ibanez rewcently with AccuCast b20 bridge. The thing is, that the bridge itself, the tuners and some other stuff is some kind of oxidated and have stains on them.. Is this process reversible? Or...
My 4 string Ibanez SRX500 was looking a little worse for wear. The rosewood fretboard had lost its lustre after being neglected for a couple of years, so I took the strings off of it, and oiled it. Took almost an hour and 5 coats to bring it back. I did a setup and restrung it.
Plugged it in...
Just bought a neck for my Ibanez TR 70. Previous owner actually bought and applied those silly "Tree of Life" stickers on the maple fretboard.
How can I clean them off without damaging the finish or loosening the frets?
i picked up a used warrior signature 5 today. It has a wedge fretboard with flame maple block inlays. Looks gorgeous, but definitely needs to be cleaned. I’ve done some research with wire wheels and toothbrushes but is there any way I can clean this fretboard without ruining the inlays?
I started playing bass few weeks ago and I tried jaco right hand technic which placing thumb on jazz magnetic but my fingers are short and it creates unbearable stress.
Last night , I placed my thumb on end of neck fingerboard corner area and my other 3 finger started to work like a machine. It...
Just got her this morning. PHD Basses Custom 432. 32" scale, 24 fret beauty! One piece Mahogany body with 5A Walnut top. Set neck of quartered mahogany. 12" radius Ebony fretboard with Abalone side dots. Nordstrand 3b-5a Preamp with Nordstrand Fat Stacks. Hipshot bridge and Ultralight...
Hey Folks!
So I recently acquire a Geddy Lee Neck MIJ circa 1994 and the bass neck came with the fretboard stripped of the finish on the board. So I searched YouTube, used 0000 steel wool got the board nice and clean. But I was wondering if use naphtha or some other solvent to make the board...
Whether it's maple or rosewood or pau ferro or ebony or ebanol or carbon fiber or a weirwood tree's face carved by the children of the forest into a fretboard.....does the material of which the fretboard is made make a difference that you can hear? "Maple is brighter and rosewood is...
I'm finally getting around to buying a P Bass, which I'll buy once I get my tax returns back. Should I pay much attention to the fretboard, or just buy what I think looks better?
I didn't have a choice with my Jazz Bass, because the model I wanted only came in one option, and that had a...
Looks of the bass are very important to me long with the usual sound and feel. I just can't help it.....I just DO NOT like the way a maple fretboard looks. Any darkwood does it for me. Rosewood, Wenge etc. Ive owned one bass in my 35+ years of playing that had a maple fretboard.
What about you...
MIM Fender Mustang P/J Bass
These now come with Pau Ferro. This is from 2017 and has a Rosewood fretboard.
- Sonic Blue w/Mint Pickguard
- Rosewood fretboard
- P/J pickup configuration
- Currently strung with tapewound strings
- Pickup toggle switch could use some de-oxit spray. It's a little...
MIM Fender Mustang P/J Bass
These now come with Pau Ferro. This is from 2017 and has a Rosewood fretboard.
- Sonic Blue w/Mint Pickguard
- Rosewood fretboard
- P/J pickup configuration
- Currently strung with tapewound strings
- Pickup toggle switch could use some de-oxit spray. It's a little...
as title says. I have searched and searched, but cannot find an exact number. my searching skills may be poor. It is the original, MM pickup passive style MTD Kingston that came out in the early 2000's
I need a radius block because I am going to de-fret and I want to sand as close to the...
For Sale is a G&L Bass, SB-2 Tribute, 4 String. Very good condition, serial number indicates it was built in 2008. I have had it about a year or so now, just use my 5 string basses more. Great metallic Bordeaux red color, basswood body, maple neck, rosewood fingerboard. Controls are Volume and...
For Sale is a G&L Bass, SB-2 Tribute, 4 String. Very good condition, serial number indicates it was built in 2008. I have had it about a year or so now, just use my 5 string basses more. Great metallic Bordeaux red color, basswood body, maple neck, rosewood fingerboard. Controls are Volume and...
I have a simple question. When I started playing bass years ago (before dropping it for the drums), I learned the strings as EADG and visualizing that as "going down." Obviously, you are going up in pitch as you go from E to G.
So I'm wondering if I should continue to visualize EADG as going...
Figured it was time to give my old Jazz bass some TLC, it's been awhile. All of a sudden my ~10 year old flatwound strings sound dead. Funny how that works... Anywho... I was just gonna change my strings and do a quick setup, but after I took the strings off I figured I would take a good look at...